Stochastic Models for the Kinematics of Moisture Transport and Condensation in Homogeneous Turbulent Flows
نویسندگان
چکیده
The transport of a condensing passive scalar is studied as a prototype model for the kinematics of moisture transport on isentropic surfaces. Condensation occurs whenever the scalar concentration exceeds a specified local saturation value. Since condensation rates are strongly nonlinear functions of moisture content, the mean moisture flux is generally not diffusive. To relate the mean moisture content, mean condensation rate, and mean moisture flux to statistics of the advecting velocity field, a one-dimensional stochastic model is developed in which the Lagrangian velocities of air parcels are independent Ornstein– Uhlenbeck (Gaussian colored noise) processes. The mean moisture evolution equation for the stochastic model is derived in the Brownian and ballistic limits of small and large Lagrangian velocity correlation time. The evolution equation involves expressions for the mean moisture flux and mean condensation rate that are nonlocal but remarkably simple. In a series of simulations of homogeneous two-dimensional turbulence, the dependence of mean moisture flux and mean condensation rate on mean saturation deficit is shown to be reproducible by the one-dimensional stochastic model, provided eddy length and time scales are taken as given. For nonzero Lagrangian velocity correlation times, condensation reduces the mean moisture flux for a given mean moisture gradient compared with the mean flux of a noncondensing scalar.
منابع مشابه
Use of Stochastic Turbulence Models in Jet Acoustics
There are many approaches to determine the sound propagated from turbulent flows. In hybrid methods, the turbulent noise source field is computed or modeled separately from the far-field calculations. To have an initial and quick estimation of the sound propagation, less computationally intensive methods can be developed using stochastic models of the turbulent fluctuations. In this paper, ...
متن کاملNumerical Simulation of Separation Bubble on Elliptic Cylinders Using Three-equation k-? Turbulence Model
Occurrence of laminar separation bubbles on solid walls of an elliptic cylinder has been simulated using a recently developed transitional model for boundary layer flows. Computational method is based on the solution of the Reynolds averaged Navier-Stokes (RANS) equations and the eddy-viscosity concept. Transitional model tries to simulate streamwise fluctuations, induced by freestream turbulen...
متن کاملAssessment of Turbulent Models in Computation of Strongly Curved Open Channel Flows
Several rigorous turbulent models have been developed in the past years and it can be seen that more research is needed to reach a better understanding of their generality and precision by verifying their applications for distinct hydraulic phenomena; under certain assumptions. This survey evaluates the performance of Standard k-ε, Realizable k-ε, RNG k-ε, k-ω and RSM models in predicting flow ...
متن کاملA New Model for Prediction of Heat Eddy Diffusivity in Pipe Expansion Turbulent Flows
A new model to calculate heat eddy diffusivity in separating and reattaching flows based on modification of constant Prt is proposed. This modification is made using an empirical correlation between maximum Nusselt number and entrance Reynolds number. The model includes both the simplicity of Prt=0.9 assumption and the accuracy of two-equation heat-transfer models. Furthermore, an appropriate l...
متن کاملNumerical simulation of turbulent compressible flows in a C-D nozzle with different divergence angles
Compressible gas flow inside a convergent-divergent nozzle and its exhaust plume atdifferent nozzle pressure ratios (NPR) have been numerically studied with severalturbulence models. The numerical results reveal that, the SST k–ω model give the bestresults compared with other models in time and accuracy. The effect of changes in value ofdivergence half-angle (ε ) on the nozzle performance, thru...
متن کامل