On the Effect of Preparation Methods of PdCe-MOR Catalysts as NOx CH4-SCR System for Natural Gas Vehicles Application
نویسندگان
چکیده
In the present work, the effect of several parameters involved in the preparation of PdCe-HMOR catalysts active for NOx selective catalytic reduction with methane (NOx CH4-SCR) was studied. Results show that the catalytic performance of Pd-HMOR is better when palladium is introduced by ion-exchange, namely at room temperature. It was also shown that Pd loading does not influence the formation of cerium species, namely surface Ce4+ (CeO2) species and CeO2 species in interaction with Pd. However, when Ce is introduced before Pd, more surface CeO2 species are stabilized in the support and less CeO2 become in interaction with Pd, which results in a worse NOx CH4-SCR catalytic performance.
منابع مشابه
Selective Catalytic Reduction of NOx with Methane over Ag-alumina Catalysts in High-content SO2 Gas Streams
In this work, we investigated the performance of Ag-alumina catalysts for the SCR of NO with methane in gas streams with a high concentration of SO2, typical of coal-fired power plant flue gas. Agalumina catalysts were prepared by co-gelation and nitric-acid leaching was used to remove weakly bound silver species from the catalyst surface [1, 2]. We found that SO2 has a dramatic inhibitory effe...
متن کاملOptimization and Modeling of CuOx/OMWNT’s for Catalytic Reduction of Nitrogen Oxides by Response Surface Methodology
A series of copper oxide (CuOx) catalysts supported by oxidized multi-walled carbon nanotubes (OMWNT’s) were prepared by the wet impregnation method for the low temperature (200 °C) selective catalytic reduction of nitrogen oxides (NOx) using NH3 as a reductant agent in the presence of excess oxygen. These catalysts were characterized by FTIR, XRD, SEM-EDS, and H2-TPR meth...
متن کاملPreparation of Lanthanum–Nickel–Aluminium Perovskite Systems and their Application in Methane-Reforming Reactions
In this study we developed LaNixAl1-xO3 perovskite systems using a sol-gelmethod (with propionic acid as solvent) to use in methane-reforming reactions for producing synthesis gas. To understand the roles of the nature of the precursor and calcination conditions on the formation of LaNixAl1-xO3, we carried out identifications using NMR, FT-IR, XRD, SEM, and TEM. The precursor struc...
متن کاملFluidized bed plasmas reactor for catalyst pretreatment. Application for SCR NOx by hydrocarbons in stationary and mobile sources
Introduction Nowadays, almost all major chemicals are produced by catalytic processes. Among them, heterogeneous catalysis plays a very active role, because of environmental concerns. The use of plasmas for catalysis is now well developed and some authors have used plasma treatment in a low pressure system to replace the thermal calcination of the catalysts [1]Fluidized bed reactors offer the p...
متن کاملSulfur and Water Resistance of Mn-Based Catalysts for Low-Temperature Selective Catalytic Reduction of NOx: A Review
Selective catalytic reduction (SCR) with NH3 is the most efficient and economic flue gas denitrification technology developed to date. Due to its high low-temperature catalytic activity, Mn-based catalysts present a great prospect for application in SCR de-NOx at low temperatures. However, overcoming the poor resistance of Mn-based catalysts to H2O and SO2 poison is still a challenge. This pape...
متن کامل