Structure, composition and function of interfaces in ceramic fibre/matrix composites
نویسندگان
چکیده
Improving the properties of fibre reinforced ceramics and glasses by optimizing their microstructure requires the knowledge of this structure down to the atomic level. In these materials energy-dissipative processes during fracture particularly act within an interface layer or layer system between fibre and matrix which can either be produced by fibre coating, or which develops during the processing of the composites. Examples are presented of the microstructural phenomena of such layers revealed by HVEM and HREM and complemented by microchemical information via a nanoscale EDXS equipment. The investigations are carried out on Nicalon fibres in Duran glass as well as on Tyranno, Nicalon and carbon fibres in different Sic-matrices. Finally, a process is discussed which may control the important interface parameters.
منابع مشابه
Interfaces and interfacial mechanics : influence on the mechanical behavior of ceramic matrix composites (CMC)
The influence of fiberlmatrix interactions on the mechanical behavior of ceramic matrix composites is examined on glass matrix composites and mainly on composites made by chemical vapor infiltration (CVI) of a fiber preform by a SiC matrix. Then the relationships between interfaces and features of the stress-strain behavior are highlighted on microcomposite specimens using experimental data and...
متن کاملInvestigation of Defects in Ferro-Tic Composites and their Prevention
The effective parameters that influence in situ cast ferroTic composites were investigated. Centrifugal casting of specimens was carried out using ceramic & metallic molds. OM, SEM and XRD techniques were used to examine the existence of flows in the specimens. Results show that the control of chemical composition, processing, cooling rate and heat treatment has a promising effect on the qual...
متن کاملInfluence of fibre-matrix interface on the fracture behaviour of carbon-carbon composites
This paper studies the fracture behaviour of unidirectional carbon fibre reinforced carbon matrix composites and its relation with the type of fibre-matrix interface developed in the composite. Model unidirectional carbon-carbon composites were prepared using the same type of fibre and different pitches as matrix precursors. These included both commercial pitches and synthesized in the laborato...
متن کاملInvestigation of Defects in Ferro-Tic Composites and their Prevention
The effective parameters that influence in situ cast ferroTic composites were investigated. Centrifugal casting of specimens was carried out using ceramic & metallic molds. OM, SEM and XRD techniques were used to examine the existence of flows in the specimens. Results show that the control of chemical composition, processing, cooling rate and heat treatment has 
a promising effect on the qu...
متن کاملHomogenized Finite Element Analysis on Effective Elastoplastic Mechanical Behaviors of Composite with Imperfect Interfaces
A three-dimensional (3D) representative volume element (RVE) model was developed for analyzing effective mechanical behavior of fiber-reinforced ceramic matrix composites with imperfect interfaces. In the model, the fiber is assumed to be perfectly elastic until its tensile strength, and the ceramic material is modeled by an elasto-plastic Drucker-Prager constitutive law. The RVE model is then ...
متن کامل