Modification of Single Puncture Arthrocentesis-A Technical Note

نویسندگان

  • Surej Kumar
  • Suvy Manuel
چکیده

Arthrocentesis is a simple conservative surgical procedure with minimal invasion performed to flush the inflammed TMJ. This treatment modality has been well in practice since over two decades now. Recently, the concept of single puncture arthrocentesis has been introduced and is gaining wide popularity. We believe that the concept of single puncture has revolutionized the traditional technique of arthrocentesis. Here we demonstrate a modified dual needle device for single puncture arthrocentesis and our modifications of using a smaller gauge needle as well as change in angulation definitely have an added advantage over conventional single puncture technique.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Heavy Metal Removal from Water and Wastewater Using Raw and Modified Diatomite (TECHNICAL NOTE)

heavy metal removal from water and wastewater was investigated by using raw and modified diatomite from Iranian mines. Modification of diatomite was done by impregnating the diatomite surface with 0.35 g of manganese oxide in one gram of diatomite. This modified diatomite was named Mn-Diatomite. The surface area measurements for Mn-diatomite showed a 2.2 fold increase, hence higher removal capa...

متن کامل

A blended approach to invasive bedside procedural instruction.

OBJECTIVE This study assessed the impact of a blended, standardized curriculum for invasive bedside procedural training on medical knowledge and technical skills for Internal Medicine residents. METHODS The investigators developed a curriculum in procedural instruction and performance for Internal Medicine house staff, and implemented the program at a tertiary care academic medical center wit...

متن کامل

The Causes of Local Hardness Increasing in Powerplant Rotors and its Modification by Tempering (TECHNICAL NOTE)

Local hardness increasing on the surface of the power plant rotor may result in severe damages. One major solution for rapid repairing of the rotors is the adaptive tempering heat treatment. For this purpose, after identification of the damaged rotor, initial investigations and tests (such as visual inspection, chemical analysis, nondestructive hardness measurements and replica or on-site metal...

متن کامل

Free Vibration Analysis of a Sloping-frame: Closed-form Solution versus Finite Element Solution and Modification of the Characteristic Matrices (TECHNICAL NOTE)

This article deals with the free vibration analysis and determination of the seismic parameters of a sloping-frame which consists of three members; a horizontal, a vertical, and an inclined member. The both ends of the frame are clamped, and the members are rigidly connected at joint points. The individual members of the frame are assumed to be governed by the transverse vibration theory of an ...

متن کامل

Moditication Factor for Sizing Equation of Electrical Machines-Single and Three Phase Induction Motors(RESEARCH NOTE)

Comparison between the results from the design procedure based upon the value of D2L (volume of iron) and IEC standard used by manufacturers indicates that the basic design equation of electrical machines must be modified by a proper modification factor. This modification factor is evaluated for single- and three-phase induction motors and its variation with motor rating and poles number is obt...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2015