Cantilever-Based Optical Interfacial Force Microscope in Liquid Using an Optical-Fiber Tip
نویسندگان
چکیده
Related Articles Non-invasive timing of gas gun-launched projectiles using external surface-mounted optical fiber-Bragg grating strain gauges Rev. Sci. Instrum. 84, 035002 (2013) Variable-temperature device for precision Casimir-force-gradient measurement Rev. Sci. Instrum. 84, 025110 (2013) Casimir probe based upon metallized high Q SiN nanomembrane resonator Rev. Sci. Instrum. 84, 015115 (2013) Strain mapping with nm-scale resolution for the silicon-on-insulator generation of semiconductor devices by advanced electron microscopy J. Appl. Phys. 112, 124505 (2012) Scanning transmission electron microscopy strain measurement from millisecond frames of a direct electron charge coupled device Appl. Phys. Lett. 101, 212110 (2012)
منابع مشابه
Simultaneous measurement of normal and friction forces using a cantilever-based optical interfacial force microscope.
We measured normal and friction forces simultaneously using a recently developed cantilever-based optical interfacial force microscope technique for studies of interfacial structures and mechanical properties of nanoscale materials. We derived how the forces can be incorporated into the detection signal using the classical Euler equation for beams. A lateral modulation with the amplitude of nan...
متن کاملAtomic-resolution imaging in liquid by frequency modulation atomic force microscopy using small cantilevers with megahertz-order resonance frequencies.
In this study, we have investigated the performance of liquid-environment FM-AFM with various cantilevers having different dimensions from theoretical and experimental aspects. The results show that reduction of the cantilever dimensions provides improvement in the minimum detectable force as long as the tip height is sufficiently long compared with the width of the cantilever. However, we also...
متن کاملNear-field optical microscope using a silicon-nitride probe
Operation of an alternative near-field optical microscope is presented. The microscope uses a microfabricated silicon-nitride probe with integrated cantilever, as originally developed for force microscopy. The cantilever allows routine close contact near-field imaging on arbitrary surfaces without tip destruction. The effect of adhesion forces on the coupling to the evanescent wave has been obs...
متن کاملWeight Measurements by Using Simple Optical-Fiber Sensors (RESEARCH NOTE)
The use of different optical-fiber sensors for weighing measurements is Abstract described. By using three different mechanical stressing mechanisms, the operation of the fiber-to-fiber transducer systems are tested and the results are presented. Parameters such as sensitivity, hysteresis, resolution, and dynamic range are measured. A comparison of the results has shown that the sensor system m...
متن کاملSensitivity analysis of a caliper formed atomic force microscope cantilever based on a modified couple stress theory
A relationship based on the modified couple stress theory is developed to investigate the flexural sensitivity of an atomic force microscope (AFM) with assembled cantilever probe (ACP). This ACP comprises a horizontal cantilever, two vertical extensions and two tips located at the free ends of the extensions which form a caliper. An approximate solution to the flexural vibration problem is obta...
متن کامل