Inductive Power Transfer Systems for Bus-Stop-Powered Electric Vehicles
نویسندگان
چکیده
Abstract: This study presents an inductive power transfer (IPT) system for electric vehicles (EVs) based on EE-shaped ferrite cores. The issues of the IPT system such as efficiency, air gap, displacement, dislocation, and motion are discussed. Furthermore, finite element analysis software is utilized to simulate the IPT system operated under large air gap conditions. Simulation and measurement results are presented to validate the performance of the proposed scheme and meet the requirements for bus-stop-powered EVs.
منابع مشابه
A Bidirectional Wireless Power Transfer System for Roadway Powered Electric Vehicles
A wireless power transfer system for roadway powered electric vehicles (EVs) is presented. The system concept is using inductive coupling of primary coils arranged in a linear array in the roadway to secondary coils in each EV. The system is geared to minimize loss of the stored energy in the primary coils and compensation capacitors by passing the energy on to the subsequent coil and capacitor...
متن کاملDC-DC converter for Hybrid Electric Vehicle and EV
One of the most critical issues for the environment today is pollution generated by hydrocarbon combustion, which is one of the main sources of power for transportation. Hybrid electric vehicles (HEV) and full electric vehicles (EV) are rapidly advancing as alternative power trains for green transportation. The vehicles’ electrification not only involves the traction parts, but it is also gener...
متن کاملIntelligent Power Control of Green Building-Integrated of Fuel Cell and Plug-in Electric Vehicle in Smart Distribution Systems
The renewable energy sources and plug-in electric vehicles (PEVs) are becoming very popular because of the combination of high fuel costs and concerns about emission issues. This paper presents modelling and control of a Building Integrated Fuel Cell and Plug-in Electric Vehicles (BIFC-PEV) in smart distribution systems. In BIFC-PEV system, conventional building elements could be replaced by sp...
متن کاملAn Investigation on the Effect of Using Regenerative Braking System on Energy Consumption Reduction of Hybrid Vehicles Based on Tehran City Driving Cycle
In driving and when you brake, a lot of energy is dissipated to stop the car; especially in urban areas where the vehicle is driving in a stop-and-go pattern. This energy, which is dissipated by the brake pads, can be stored in the vehiclechr('39')s battery. In Hybrid and Electric Vehicles, a regenerative brake can be used alongside the mechanical brakes to regenerate some energy while braking....
متن کاملA MILP Model for Coordinated Charging of Electric Vehicles in Smart Unbalanced LV Distribution Networks Using Floating Charge Method
In this paper, a mixed-integer linear programming (MILP) model is proposed to solve the charging problem of electric vehicles (EVs) using floating charge method meaning that the EV, could be supplied by each of the three phases connected to a special bus. In other words, unlike a usual household load which is only supplied by a particular phase, in the floating charge method it is assumed that ...
متن کامل