How to Select Underfill Materials for Solder Bumped Flip Chips on Low Cost Substrates?
نویسندگان
چکیده
Ten different underfill materials with different size and content of filler and epoxy are studied in this paper. Their curing conditions such as time and temperature are measured by a differential scanning calorimeter (DSC) unit. Their material properties, such as the CTE (coefficient thermal of expansion), T g (glass transition temperature), dynamic storage modulus, tangent delta, and moisture content are carried out using the thermal mechanical analysis (TMA), dynamic mechanical analysis (DMA), and thermal gravimetric analysis (TGA). Their flow rate and the effect of moisture content on mechanical (shear) strength in a solder bumped Flip Chip on board are measured. Finally, based on the present results, a simple guideline is presented for the selection of underfill materials.
منابع مشابه
Development of No-Flow Underfill Materials for Lead-Free Solder Bumped Flip-Chip Applications
No-flow underfill process in flip-chip assembly has become a promising technology toward a smaller, faster and more cost-efficient packaging technology. The current available no-flow underfill materials are mainly designed for eutectic tin-lead (Sn/Pb) solders. With the advance of lead-free interconnection due to the environmental concerns, a new no-flow underfill chemistry needs to be develope...
متن کاملEffects of Underfill Delamination and Chip Size on the Reliability of Solder Bumped Flip Chip on Board
An investigation on the solder bumped Flip Chip on Printed Circuit Board (FCOB) is presented in this paper. The emphasis is placed on the effects of delamination crack between the underfill encapsulant and the solder mask on the solder joint reliability of FCOB. In the present study, a fracture mechanics approach is employed. The strain energy release rate at the crack tip between the underfill...
متن کاملDouble-Layer No-Flow Underfill Materials and Process
The no-flow underfill has been invented and practiced in the industry for a few years. However, due to the interfering of silica fillers with solder joint formation, most no-flow underfills are not filled with silica fillers and hence have a high coefficient of thermal expansion (CTE), which is undesirable for high reliability. In a novel invention, a double-layer no-flow underfill is implement...
متن کاملReliability Evaluation of Underfill Encapsulated Pb- Free Flip Chip Package under Thermal Shock Test
Thermo-mechanical reliability of the solder bumped flip chip packages having underfill encapsulant was evaluated with thermal shock testing. In the initial reaction, the reaction product between the solder and Cu mini bump of chip side was Cu6Sn5 IMC layer, while the two phases which were (Cu,Ni)6Sn5 and (Ni,Cu)3Sn4 were formed between the solder and electroless Ni-P layer of the package side. ...
متن کاملA Parametric Study of Flip Chip Reliability Based on Solder Fatigue Modelling: Part II - Flip Chip on Organic
A solder fatigue model for the 63Sn/Pb solder alloy has been previously introduced which characterizes the creep fatigue phenomena of the solder by combining nonlinear finite element modelling with experimental thermal fatigue lives of various flip chip assemblies. The model correlates the amount of creep strain energy dissipated per thermal cycle with the characteristic Weibull life of the cri...
متن کامل