Surface Acoustic Wave (SAW) for Chemical Sensing Applications of Recognition Layers †
نویسندگان
چکیده
Surface acoustic wave (SAW) resonators represent some of the most prominent acoustic devices for chemical sensing applications. As their frequency ranges from several hundred MHz to GHz, therefore they can record remarkably diminutive frequency shifts resulting from exceptionally small mass loadings. Their miniaturized design, high thermal stability and possibility of wireless integration make these devices highly competitive. Owing to these special characteristics, they are widely accepted as smart transducers that can be combined with a variety of recognition layers based on host-guest interactions, metal oxide coatings, carbon nanotubes, graphene sheets, functional polymers and biological receptors. As a result of this, there is a broad spectrum of SAW sensors, i.e., having sensing applications ranging from small gas molecules to large bio-analytes or even whole cell structures. This review shall cover from the fundamentals to modern design developments in SAW devices with respect to interfacial receptor coatings for exemplary sensor applications. The related problems and their possible solutions shall also be covered, with a focus on emerging trends and future opportunities for making SAW as established sensing technology.
منابع مشابه
TiO2 based surface acoustic wave gas sensor with modified electrode dimensions for enhanced H2 sensing application
The design and optimization of nanostructure-based surface acoustic wave (SAW) gas sensor is analyzed based on TiO2 sensing layer and modified electrode dimensions. The sensitivity of the gas sensor depends upon the type of sensing layer used and active surface area obtained by varying the aspect ratio. The performance of the sensor is observed from 0.1ppm to 100ppm concentration of ...
متن کاملLayered Surface Acoustic Wave Chemical and Bio-Sensors
Surface acoustic wave (SAW) sensors are currently being investigated in a wide range in fields including physical, chemical and bio-sensing. The basic principle in a SAW sensor is the detection of changes in the propagation characteristics of the surface acoustic waves which are caused by perturbations on the active surface of the device. The most common situation is measuring the change in pro...
متن کاملSensing Materials for Surface Acoustic Wave Chemical Sensors
Online real‐time monitoring of gases requires a miniaturized, passive, and accurate gas sensor. Surface acoustic wave (SAW) devices possess these properties which make them suitable for gas‐sensing applications. They have shown remarkable results in sensing of different gases in terms of sensitivity, selectivity, response, and recovery times. One of the important prerequisites a designer should...
متن کاملGuided shear horizontal surface acoustic wave sensors for chemical and biochemical detection in liquids.
The design and performance of guided shear horizontal surface acoustic wave (guided SH-SAW) devices on LiTaO3 substrates are investigated for high-sensitivity chemical and biochemical sensors in liquids. Despite their structural similarity to Rayleigh SAW, SH-SAWs often propagate slightly deeper within the substrate, hence preventing the implementation of high-sensitivity detectors. The device ...
متن کاملSAW Sensors for Chemical Vapors and Gases
Surface acoustic wave (SAW) technology provides a sensitive platform for sensing chemicals in gaseous and fluidic states with the inherent advantages of passive and wireless operation. In this review, we provide a general overview on the fundamental aspects and some major advances of Rayleigh wave-based SAW sensors in sensing chemicals in a gaseous phase. In particular, we review the progress i...
متن کامل