Study of Surface Displacements on Tunnelling under Buildings Using 3DEC Numerical Modelling

نویسندگان

  • Nalini Rebello
  • V R Sastry
  • R Shivashankar
چکیده

Underground structures at shallow depths are often constructed for metro lines, either in loose or dense layered soils. Tunnelling in urban areas is predominantly under surface structures and on tunnelling, innumerable changes in the form of distortion take place in strata surrounding the tunnel. Extent of displacement/damage to buildings or the tunnel-soil structure interaction depends on the type of building and nature of strata. Effect on displacements has been less studied in granular soils compared to other types of soils like clays. In this paper, parametric studies are conducted to find the displacements at surface, in granular soil conditions, due to varying building storeys and building eccentricities from the tunnel centre line. Effect of presence of geosynthetic layer under footings is further studied. Prior to the parametric studies, validity of the model used is checked with field data available for a stretch of tunnel in South India. Results of simulation studies reveal that inclusion of building reduces displacements at the surface in the dense strata. In very dense strata, the displacements increase as compared to the case without a building. As the centre of the building moves away from the tunnel centre line, settlement above the tunnel matches displacements in the case without building. Applicability of 3DEC software is checked with respect to the present study.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Numerical modeling of tunneling induced ground deformation and its control

Tunnelling through cities underlain by soft soil, commonly associated with soil movement around the tunnels and subsequent surface settlement. The predication of ground movement during the tunnelling and optimum support pressure could be based on analytical, empirical or the numerical methods. The commonly used Earth pressure balance (EPB) tunneling machines, uses the excavated soil in a pressu...

متن کامل

Some Experiences of Modelling Tunnelling in Soft Ground Using Three-dimensional Finite Elements

A three-dimensional finite element model has been developed at Oxford University to study the effects of subsidence from soft ground tunnelling on adjacent surface structures. Simulation of excavation and the ground loss associated with tunnelling are incorporated in the model. Surface buildings are also included, as groups of interconnected two-dimensional façades composed of an elastic no ten...

متن کامل

Process-related deformation monitoring by PSI using HR space- based SAR data

TerraSAR-X satellite SAR (Synthetic Aperture Radar) scenes have been analysed using Persistent Scatter Interferometry (PSI) approach to monitor a tunnelling process in Düsseldorf, Germany. The aim of this work is to detect the deformation of ground surface and structures above the tunnelling line during the tunnel excavation. In this study, 5 the PSI approach integrated in the open source softw...

متن کامل

Evaluation of Seismic Vulnerability of Reinforced Concrete Buildings Adjacent to the Deep Excavations

In this study, the effect of deep excavation on the seismic response of RC moment resisting building systems has been studied. Deep excavation can cause significant changes in the stress and strain levels of soil environment and also changes in the propagation of seismic waves. This leads to permanent displacements in the foundation system. In this study, three RC building systems, i.e. 5, 10, ...

متن کامل

Testing and numerical modelling of Steel-Concrete-Steel with stud bolts connectors subject to push-out loading

Steel-concrete-steel (SCS) sandwich panels are composed of two steel plates with low thicknesses and high densities and strengths and one thick layer between both plates with low strength and density known as core that is composed of concrete. Cohesive material-epoxy resin or shear connectors are usually used to connect the plates to the concrete core. SCS sandwich composites are being develope...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره 2014  شماره 

صفحات  -

تاریخ انتشار 2014