Developing Simulation Models for Dynamic Optimization
نویسندگان
چکیده
Dynamic optimization based on simulation is extremely time consuming. The quest for the optimal solution requires a vast number of iterations. Since the simulation is performed at each iteration step, the decrement of the simulation time becomes crucial. This paper presents the development of simulation models for dynamic optimization. The area of interest is paper and pulp industry. The keyword for the modeling is simplicity. Simplicity speeds up the simulation and decreases the time needed for the optimization.
منابع مشابه
CRACK DETECTION IN CONCRETE BEAM USING OPTIMIZATION METHOD
Structural damage detection is a field that has attracted a great interest in the scientific community in recent years. Most of these studies use dynamic analysis data of the beams as a diagnostic tool for damage. In this paper, a massless rotational spring was used to represent the cracked sections of beams and the natural frequencies and mode shape were obtained. For calculation of rotational...
متن کاملDevelopment of PSPO Simulation Optimization Algorithm
In this article a new algorithm is developed for optimizing computationally expensive simulation models. The optimization algorithm is developed for continues unconstrained single output simulation models. The algorithm is developed using two simulation optimization routines. We employed the nested partitioning (NP) routine for concentrating the search efforts in the regions which are most like...
متن کاملDevelopment of a compression system dynamic simulation code for testing and designing of anti-surge control system
In recent years, several research activities have been conducted to develop knowledge in analysis, design and optimization of compressor anti-surge control system. Since the anti-surge control testing on a full-scale compressor is limited to possible consequences of failure, and also the experimental facility can be expensive to set up control strategies and logic, design process often involves...
متن کاملAn ANOVA Based Analytical Dynamic Matrix Controller Tuning Procedure for FOPDT Models
Dynamic Matrix Control (DMC) is a widely used model predictive controller (MPC) in industrial plants. The successful implementation of DMC in practical applications requires a proper tuning of the controller. The available tuning procedures are mainly based on experience and empirical results. This paper develops an analytical tool for DMC tuning. It is based on the application of Analysis of V...
متن کاملEnhancing Energy Management Of A Car Manufacturing Plant Through Modelling And Dynamic Simulation
Car manufacturing is a significant energy consumer and it is a common practice to co-produce electricity and heat on-site. Despite of the research and development already conducted in the area, many opportunities for reducing energy use exist. By developing an intelligent Energy Management System which utilizes precise monitoring of the energy production and consumption as well as predictive op...
متن کامل