FIR single and double notch filter design with narrow rejection bandwidth
ثبت نشده
چکیده
Abstract— This paper presents a method for design of single and double notch finite impulse response (FIR) filter using prototype of second order infinite impulse response (IIR) filter. The length of FIR filter is selected on the basis of location of zeros in the unit circle. Further, the concept of amplitude change function (ACF) is used to reduce the rejection bandwidth (RBW). Pole radius selection is also suggested for reducing the error of response.
منابع مشابه
Design of a new narrow band channel drop filter based on photonic crystal ring resonator
In this design an optical ring resonator are embedded between two Horizontal input and output waveguides which has 4 orbitals around the center of the resonator so that each orbital consists of 8 rods with different size in which radius of larger orbitals rods are bigger than radius of smaller orbitals rods. The analysis of simulation results showed the proposed filter has the transmission effi...
متن کاملA Novel Compact Ultra-Wideband Antenna with Single and Double Band Rejection
Band-notch characteristic has been of great interest recently to overcome the electromagnetic interference of Ultra-wideband systems (UWB) with other existing ones. In this paper, we present a novel microstrip-fed antenna with band rejection property appropriate for UWB applications. Band-notch characteristic has been achieved by adding a rectangular resonant element to the ground section. A pr...
متن کاملUltra Wideband Monopole Antenna Excited by a Capacitive Coupling Feed with Double Band Notch Function
This paper presents the results of a new monopole antenna that exhibits 2.75-10.7 GHz performance. The proposed antenna consists of a radiating patch with notches excited by capacitive coupling feed. Also, the antennas truncated ground-plane incorporates a central notch. This modification significantly improves the antennas impedance bandwidth by 118% over an ultra-wideband frequency range. T...
متن کاملDesign and Fabrication of a Narrow-bandwidth Micromechanical Ring Filter using a Novel Process in UV-LIGA Technology
This paper presents the design and a new low-cost process for fabrication of a second-order micromechanical filter using UV-LIGA technology. The micromechanical filter consists of two identical bulk-mode ring resonators, mechanically coupled by a flexural-mode beam. A new lumped modeling approach is presented for the bulk-mode ring resonators and filter. The validity of the analytical derivatio...
متن کاملA Novel Interference Rejection Method for GPS Receivers
This paper proposes a new method for rejecting the Continuous Wave Interferences (CWI) in the Global Positioning System (GPS) receivers. The proposed filter is made by cascading an adaptive Finite Impulse Response (FIR) filter and a Wavelet Packet Transform (WPT) based filter. Although adaptive FIR filters are easy to implement and have a linear phase, they create self-noise in the rejection of...
متن کامل