Influence of technological parameters on the properties of sol-gel silica films
نویسنده
چکیده
The paper presents the influence of selected technological parameters on the properties of silica films produced in sol-gel processes using the dip-coating method. The influence of water content and catalyst content was investigated as well as the influence of aging time of sols. It was demonstrated that the conditions of film deposition and the content of catalyst have a great influence on the thickness of the films produced. The greatest influence on the refractive index is exerted by molar ratio TEOS:H2O. Together with the rise of aging time of the sol its properties are changing, and the changes depend on pH.
منابع مشابه
New Sol-Gel Solution with 45 Days Stability for Preparation Silica Thin Films
As we know sol-gel is one of the most important techniques for thin film preparation. In this paper, high transmission silica thin films have been prepared by dip-coating process from a new silicon-alkoxide solution. The prepared sol was stable for 45 days which is very important to characterize the coating process. The optical properties as a function of aging time, withdrawal rate, and he...
متن کاملApplication of Taguchi design for optimization of corrosion behavior of amorphous silica thin film deposited through sol-gel dipping technique
Amorphous silica thin films were applied on the 316L stainless steel substrates by sol-gel dipping technique. The starting chemicals (TEOS, ethanol, HCl, PEG, and NaOH) were used to prepare a gel and then deposited on a substrate. The microstructure, topography, corrosion behavior, and surface hardness were investigated using SEM, AFM, electrochemical method, and micro-hardness measurements. Th...
متن کاملDesign and investigation of TiO2 –SiO2 thin films on AISI 316L stainless steel for tribological properties and corrosion protection
The TiO2–SiO2 thin films were deposited on AISI 316L stainless steel via sol-gel method. Then, the effect of the added amount of SiO2 on the structure, morphology and mechanical properties of the films and corrosion behavior of AISI 316L stainless steel substrate were investigated. So, X-ray diffraction, field-emission scanning electron microscopy, atomic force microscopy, depth-sensing indenta...
متن کاملInfluence of Co and Fe substitution on optical and structural properties of zinc oxide thin films
Zn0.97TM0.03O (TM = Co, Fe) thin films were deposited onto glass substrates by the sol–gel method and the effects of transition metals substitution on structural and optical properties of ZnO films were investigated. The X-ray diffraction patterns revealed that the films have wurtzite structure. Optical transmittance of the films was recorded in the range of 200 -800 nm wave length and the band...
متن کاملCharacterization of Pure and Antimony Doped SnO2 Thin Films Prepared by the Sol-Gel Technique
Pure and antimony doped SnO2 thin films have been prepared by the sol-gel dip coating technique on glass substrate using starting material SnCl2.2H2O as a host and SbCl3 as a dopant. Our experimental results revealed that, the quality of the coated films on the glass depends on process parameters. The effect of annealing temperature, dipping numbe...
متن کامل