InP-Based Passive Ring-Resonator-Coupled Lasers
نویسندگان
چکیده
Design of passive ring-coupled lasers based on InGaAsP waveguides is investigated using beam propagation method. Mode coupling, propagation loss due to bending, and scattering loss from waveguide sidewall roughness are taken into account. By compromising threshold gain, linewidth and side-mode suppression ratio (SMSR), suitable waveguide width and coupling strength are determined for different ring sizes. Using a ring with radius ranging from 20 to 200 m, it is possible to design passive ring-coupled lasers with threshold gain less than 60/cm and 80/cm for waveguide sidewall roughness 5 and 10 nm, respectively, SMSR larger than 50 dB, and linewidth in the range of 3–500 kHz.
منابع مشابه
Analysis of InGaAsP-InP Double Microring Resonator using Signal Flow Graph Method
The buried hetero-structure (BH) InGaAsP-InP waveguide is used for asystem of double microring resonators (DMR). The light transmission and location ofresonant peaks are determined for six different sets of ring radii with different ordermode numbers. The effect of changing middle coupling coefficient on the box likeresponse is studied. It is found that the surge of coupling coefficient to the ...
متن کاملPassive microring-resonator-coupled lasers
In this letter, a passive microring-resonator-coupled semiconductor laser structure is proposed. The weakly coupled high-Q microring resonator provides a strong mode-selection filter and could considerably extend the effective cavity length of a conventional Fabry–Perot laser. The side-mode suppression ratio, the linewidth and the frequency chirp of this laser are dramatically improved comparin...
متن کاملEtched beam splitters in InP/InGaAsP.
An etched beam splitter (EBS) photonic coupler based on frustrated total internal reflection (FTIR) is designed, fabricated and characterized in the InP/InGaAsP material system. The EBS offers an ultra compact footprint (8x11 μm) and a complete range of bar/cross coupling ratio designs. A novel pre-etching process is developed to achieve sufficient depth of the etched coupling gaps. Fabricated ...
متن کاملEfficient second-harmonic generation using a semiconductor tapered amplifier in a coupled ring-resonator geometry.
A new approach for efficient second-harmonic generation using diode lasers is presented. The experimental setup is based on a tapered amplifier operated in a ring resonator that is coupled to a miniaturized enhancement ring resonator containing a periodically poled lithium niobate crystal. Frequency locking of the diode laser emission to the resonance frequency of the enhancement cavity is real...
متن کاملDirect-modulated waveguide-coupled microspiral disk lasers with spatially selective injection for on-chip optical interconnects.
We investigate direct-modulated waveguide-coupled microspiral disk lasers for on-chip optical interconnects. Microspiral resonators, with a rotationally asymmetric shape and a waveguide directly gapless coupled to the notch, offer a compact unidirectional-emission on-chip laser source. We employ spatially selective injection by means of a ring-shaped p-contact on top of the microdisk rim region...
متن کامل