Quantitative Microscopy of Coating Uniformity

Print quality demands for coated papers are steadily growing, and achieving coating uniformity is crucial for high image sharpness, colour fidelity, and print uniformity. Coating uniformity may be divided into two scales: coating thickness uniformity and coating microstructure uniformity, the latter of which includes pigment, pore and binder distributions within the coating layer. This thesis concerns the investigation of both types of coating uniformity by using an approach of quantitative microscopy. First, coating thickness uniformity was analysed by using scanning electron microscope (SEM) images of paper cross sections, and the relationships between local coating thickness variations and the variations of underlying base sheet structures were determined. Special attention was given to the effect of length scales on the coating thickness vs. base sheet structure relationships. The experimental results showed that coating thickness had a strong correlation with surface height (profile) of base sheet at a small length scale. However, at a large length scale, it was mass density of base sheet (formation) that had the strongest correlation with coating thickness. This result explains well the discrepancies found in the literature for the relationship between coating thickness variation and base sheet structure variations. The total variance of coating thickness, however, was dominated by the surface height variation in the small scale, which explained around 50% of the variation. Autocorrelation analyses were further performed for the same data set. The autocorrelation functions showed a close resemblance of the one for a random shot process with a correlation length in the order of fibre width. All these results suggest that coating thickness variations are the result of random deposition of particles with the correlation length determined by the base sheet surface textures, such as fibre width. In order to obtain fundamental understandings of the random deposition processes on a rough surface, such as in paper, a generic particle deposition model was developed, and systematic analyses were performed for the effects of particle size, coat weight (average number of particles), levelling, and system size on coating thickness variation. The results showed that coating thickness variation