Preparation of Cross-linked Nanoporous Poly(ethylene glycol) diacrylate Membrane in Hexagonal Lyotropic Liquid Crystal Phases

نویسندگان

  • F. H. She
  • W. M. Gao
چکیده

Cross-linked poly(ethylene glycol) diacrylate (PEGDA) membranes were prepared by polymerization in periodic nanostructured lyotropic liquid crystals (LLC) hexagonal phases under UV light. A series of membranes were prepared under different purification treatment conditions. Polarized light microscope was employed to determine the LLC phase texture of LLC system before and after polymerization. It is found that the LLC hexagonal structure retained to some degree after polymerization. The interior structures of final membranes were investigated with scanning electron microscope (SEM). The results suggested that purification process affect the structure retention.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Self-Diffusion of Water in Compressed Hexagonal Phases: Experimental and Simulated Results

1. Introduction Lyotropic liquid crystal materials consist of self-assembled ordered structures of amphiphilic molecules in the presence of a solvent [1]. Typically the samples consist of a powder distribution of director orientations, but certain mesophases (i.e., hexagonal and lamellar) may be macroscopically aligned with external fields such as mechanical or magnetic [2; 3]. Polymerised lyot...

متن کامل

Supporting Information Old Relief Printing Applied to Current Preparation of Multi-Color and High Resolution Colloidal Photonic Crystal Patterns

Materials: Tetraethylorthosilicate (TEOS, 98%), aqueous ammonia (28%) were purchased from Sinopharm Chemical Reagent Co. Ltd.. Carbon black (99.5%, 30 nm) was purchased from Aladdin Co. Ltd.. Ethylene glycol (EG, 99%) and ethanol (99.9%) were purchased from J&K Co. Ltd.. Poly(ethylene glycol) methacrylate (PEGMA, Mn=360) and poly(ethylene glycol) diacrylate (PEGDA, Mn=700) was purchased from Si...

متن کامل

Poly (Vinylidene Fluride) Membrane Preparation and Characterization: Effects of Mixed Solvents and PEG Molecular Weight

In this study, polyvinylidene fluoride (PVDF) ultrafiltration membranes were prepared via immersion precipitation method using a mixture of two solvents triethyl phosphate (TEP) and dimethylacetamide (DMAc), which had different affinities with the nonsolvent (water). Properties of the prepared membranes were characterized using scanning electron microscope (SEM) and contact angle and membrane p...

متن کامل

Effect of Ethylene Oxide Functional Groups in PEBA-CNT Membranes on CO2/CH4 Mixed Gas Separation

Poly (ether-block-amide) /poly (ethylene glycol)/ carbon nanotubes mixed matrix membranes have been successfully fabricated using solvent evaporation method to determine the effect of ethylene oxide groups on the performance of produced membranes. The effects of CNTs (2-8 wt%) and PEG (up to 50 wt%)were investigated in both single and mixed gas test setup in different temperature and pressure. ...

متن کامل

Synthesis of Distinct Iron Oxide Nanomaterial Shapes Using Lyotropic Liquid Crystal Solvents

A room temperature reduction-hydrolysis of Fe(III) precursors such as FeCl₃ or Fe(acac)₃ in various lyotropic liquid crystal phases (lamellar, hexagonal columnar, or micellar) formed by a range of ionic or neutral surfactants in H₂O is shown to be an effective and mild approach for the preparation of iron oxide (IO) nanomaterials with several morphologies (shapes and dimensions), such as extend...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2010