On the Second Twist Number
نویسنده
چکیده
It has been shown that the twist number of a reduced alternating knot can be determined by summing certain coefficients in the Jones Polynomial. In the discovery of this twist number, it became evident that there exist higher order twist numbers which are the sums of other coefficients. Some relations between the second twist number and the first are explored while noting special characteristics of the second twist number. 1 Background Information We begin this paper with a short review of knot theory and some important definitions. Mathematically, a knot is a closed curve in space. Further, a link is a collection of one or more interlinked knots. Here we see that a knot is just a link with one component. The simplest link is just a circle or the unknot, since it has no crossings. If we consider a link with just one crossing, we realize that this is really the unknot again with a kink in it. Now in considering a link with two crossings we have a choice: either we can get an unknot with two kinks in it or we can get a link composed of two unknots as in figure 1, called the Hopf link. The simplest nontrivial knot is called the trefoil, and it has three crossings (see figure 1). The Hopf link and trefoil are examples of alternating links, or links in which crossings alternate. Figure 1: A Hopf link and a trefoil.
منابع مشابه
The Development of a Passive False Twister Mechanism in Handling Low Strength Cotton Slivers on High Draft Spinning Machine
A passive false twist unit (spiral) has been developed to assist with the handling lowstrength slivers on a high speed-spinning machine with a high-speed feed. In the first trial, a falsetwist simulator device was constructed to determine whether the passive false twist unit can be usedon high speed feeding with different can distance from the feeding device. In the second trial, theeffects of ...
متن کاملSimulation of a New Process Design to Fabricate a Rectangular Twist Waveguide Using Extrusion and a Twist Die
The aim of the present study is to determine the feasibility of making a rectangular twist waveguide used to rotate electromagnetic waves. For this purpose, the process of fabricating an aluminum rectangular twist waveguide was simulated by making use of finite element method and Deform software. The optimum length and angle of the twist die for manufacturing a twist waveguide with inner cross ...
متن کاملPredicting Twist Condition by Bayesian Classification and Decision Tree Techniques
Railway infrastructures are among the most important national assets of countries. Most of the annual budget of infrastructure managers are spent on repairing, improving and maintaining railways. The best repair method should consider all economic and technical aspects of the problem. In recent years, data analysis of maintenance records has contributed significantly for minimizing the costs. B...
متن کاملTwist limits for late twisting double somersaults on trampoline.
An angle-driven computer simulation model of aerial movement was used to determine the maximum amount of twist that could be produced in the second somersault of a double somersault on trampoline using asymmetrical movements of the arms and hips. Lower bounds were placed on the durations of arm and hip angle changes based on performances of a world trampoline champion whose inertia parameters w...
متن کاملEffect of Twisted Tape Baffles on Pressure Drop, Fluctuation and Expansion Ratios in gas - Solid Fluidized Bed
In the present work an attempt has been made to study the effect of the twisted tapes as bed internals, on the performance of the gas-solid fluidized beds. Experimental investigation has been carried out in cylindrical column with and without twisted tapes. Twelve numbers of twisted tapes of three different widths with four values of the twist ratios for each width were studied at different...
متن کامل