Acoustic module of the Acquabona (Italy) debris flow monitoring system
نویسنده
چکیده
Monitoring of debris flows aimed to the assessment of their physical parameters is very important both for theoretical and practical purposes. Peak discharge and total volume of debris flows are crucial for designing effective countermeasures in many populated mountain areas where losses of lives and property damage could be avoided. This study quantifies the relationship between flow depth, acoustic amplitude of debris flow induced ground vibrations and front velocity in the experimental catchment of Acquabona, Eastern Dolomites, Italy. The analysis of data brought about the results described in the following. Debris flow depth and amplitude of the flow-induced ground vibrations show a good positive correlation. Estimation of both mean front velocity and peak discharge can be simply obtained monitoring the ground vibrations, through geophones installed close to the flow channel; the total volume of debris flow can be so directly estimated from the integral of the ground vibrations using a regression line. The application of acoustic technique to debris flow monitoring seems to be of the outmost relevance in risk reduction policies and in the correct management of the territory. Moreover this estimation is possible in other catchments producing debris flows of similar characteristics by means of their acoustic characterisation through quick and simple field tests (Standard Penetration Tests and seismic refraction surveys).
منابع مشابه
Real-time acoustic tomography system and the experience of Caspian current sea monitoring
The Acoustic Tomography (AT) systems are used to monitor long-term and continuous flow in rivers, seas and oceans. One of the disadvantages of existing systems in Iran is the inability of real-time/automated measurements. In this study, by adding a raspberry Pi computer to the system and performing the required programming, it was possible to do online monitoring. The data are transferred to th...
متن کاملFeasibility Study of Real-time and Automated Monitoring of Iranian Rivers using 50-kHz Fluvial Acoustic Tomography System
Acoustic Tomography (AT) technique is an innovative method for real-time river monitoring. In this study, not only the accuracy of flow velocity measurement using 50 kHz AT system which is appropriate for narrow rivers (most Iranian rivers) is evaluated, but also its performance is compared with 30 kHz one which is used in wide rivers. The comparison results showed that the velocity resolutions...
متن کاملRelations between rainfall and triggering of debris-flow: case study of Cancia (Dolomites, Northeastern Italy)
Debris-flows occurring in the area of Cancia (Dolomites, Northeastern Italy) in recent years have exposed the population to serious risk. In response to the recurring hazard, an alarm and monitoring system was installed to provide a sufficient level of safeguard for inhabitants and infrastructures. The data recorded at three rain gauges during debris-flow events has been analysed, taking into c...
متن کاملFlexural monitoring of carbon fiber/epoxy composite by acoustic emission
Carbon / epoxy composite is one of the most useful polymer matrix composites that has special properties such as high strength-to-weight ratio, high hardness, high corrosion resistance, Resistance to nuclear radiation has high consumption in different industries such as aerospace industry. Therefor monitoring of loading of this type of composite is important. In order to determine failure mecha...
متن کاملDesign, manufacture and the evaluation of Fluvial Acoustic Tomography System (FATS)
Underwater Acoustic Tomography (AT) system transmits acoustic waves into the water. The AT systems continuously measure the physical characteristics of the flow in rivers, seas and the oceans. The AT systems are synchronized via a GPS clock connectied to the satellites. Hence, the systems transmit the acoustic waves at the same time. The systems record the arrival time of acoustic waves. After ...
متن کامل