Alternative technique for investing abutments for screw-retained implant-supported restorations.

نویسندگان

  • Mario R Ganddini
  • Ross H Tallents
چکیده

504 THE JOURNAL OF PROSTHETIC DENTISTRY phase because new components must be purchased. This article describes a simple technique to limit the trapping of air bubbles in the cast-to abutments or prosthetic cylinders. This procedure reduces the risk of trapping air bubbles in the screw access holes of the abutment by directly injecting the investment into the cast-to abutment or prosthetic cylinders.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

An alternative direct technique for the fabrication of an implant-supported, screw-retained fixed interim restoration.

The Journal of Prosthetic Dentistry Yilmaz et al Lautensack et al 7. Michalakis KX, Hirayama H, Garefis PD. Cement-retained versus screw-retained implant restorations: a critical review. Int J Oral Maxillofac Implants 2003;18:719-28. 8. Okamoto M, Minagi S. Technique for removing a cemented superstructure from an implant abutment. J Prosthet Dent 2002;87:241-2. 9. Chee WW, Torbati A, Albouy JP....

متن کامل

Implant-supported titanium prostheses following augmentation procedures: a clinical report.

BACKGROUND This report describes a novel technique for fabricating retrievable implant-supported titanium (Ti) prostheses in patients requiring a comprehensive treatment plan involving the combined efforts of maxillofacial surgery and implant prosthodontics. METHODS Following bone graft reconstructive surgery and implant placement prosthetic treatment was initiated by inserting ITI-Octa abutm...

متن کامل

Influence of Sealing of the Screw Access Hole on the Fracture Resistance of Implant-Supported Restorations.

The purpose of this study was to assess the influence of sealing of the screw access hole (SAH) on the fracture resistance of metal-ceramic implant-supported restorations. UCLA abutments were used to make 30 implant-retained mandibular molar restorations and divide equally into three groups: Group SRS: screw-retained restorations with SAH sealed; Group SRNS: screw-retained restorations with SAH...

متن کامل

Maintenance Requirements of Screw- Retained Implant Prosthesis versus Telescopic Overdenture: A Randomized Controlled Trial

Statement of problem: There is little information about the maintenance requirements of implant restorations. Purpose: To compare the prosthodontic maintenance requirements of screw-retained implant prosthesis versus that of telescopic overdentures after an observation period of 18 months. Materials and methods: 26 completely edentulous patients were enrolled in the study. Patients were divided...

متن کامل

Stress distribution pattern of screw-retained restorations with segmented vs. non-segmented abutments: A finite element analysis

Background. Screw-retained restorations are favored in some clinical situations such as limited inter-occlusal spaces. This study was designed to compare stresses developed in the peri-implant bone in two different types of screw-retained restorations (segmented vs. non-segmented abutment) using a finite element model. Methods. An implant, 4.1 mm in diameter and 10 mm in length, was placed in t...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • The Journal of prosthetic dentistry

دوره 92 5  شماره 

صفحات  -

تاریخ انتشار 2004