Inertia Force Balance of Crank-Group Driving Mechanism Based on Crank Unit

نویسندگان

  • Yansong Liu
  • Jujiang Cao
  • Sheng Ren
  • Yao Wu
چکیده

The crank unit is defined as the basic unit of the crank-group driving mechanism for the modular design and production, and the balance methods of inertia force are researched on the crank unit in crank-group driving mechanism’s modular design. The factors affecting the balance weight’s position and mass are studied. This indicates that the product of the mass and gyration radius of the balance weight is influenced by the number, mass, length of the crank and the total mass moving rod in the mechanism. The balance method based on the crank unit is received to meet the modular design and production. This approach achieves the balance of crank-group driving mechanism quickly and efficiently.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Vibration Analysis of an Air Compressor Based on a Hypocycloidal Mechanism: an Experimental Study

In this paper, the experimental vibration analysis of a single cylinder air compressor based on a hypocycloid straight line mechanism (HSM) is investigated. The HSM mechanism uses planetary gears to convert rotational motion to purely linear motion. In the conventional air compressor, the slider- crank mechanism is replaced by the HSM mechanism with appropriate counterweights. The constructed s...

متن کامل

Pareto Optimal Multi-Objective Dynamical Balancing of a Slider-Crank Mechanism Using Differential Evolution Algorithm

The present paper aims to improve the dynamical balancing of a slider-crank mechanism. This mechanism has been widely used in internal combustion engines, especially vehicle engines; hence, its dynamical balancing is important significantly. To have a full balance mechanism, the shaking forces and shaking moment of foundations should be eliminated completely. However, this elimination is usuall...

متن کامل

Dynamic Simulation of Crank-group Driving Mechanism with Clearance

For the crank-group driving mechanism, the assembly clearances can offer the possibility to move overcoming the processing errors. But the clearances inevitably affect the dynamic characteristics of the mechanism. In this paper, the dynamic simulation model of the crank-group driving mechanism is established by NX/Motion Simulation which is based on the mathematical model of planar link mechani...

متن کامل

Design of Phase-Angled Balance Weights for an Inverter Driven Scroll Compressor

This paper presents a new design method of balance weights with phase angles for scroll compressors. Based on force and moment balances on crankshaft and compressor frame, mathematical formulation of shaft bearing loads, unbalanced force and moment acting on the frame has been made in terms of balance weight design parameters such as masses and phase angles of the upper and lower balance weight...

متن کامل

Virtual Prototype Modeling and Simulating Analysis of Lotus Root Slicing Machine Based on ADAMS

Based on the lotus root slicing machine of crank-slider style designed by the authors, the virtual prototype model of slicing machine has been established by the software of PRO/E, and the kinematics and dynamics performances of the slicing machine were studied by utilizing ADAMS. At the same time, analyses were made on the changes of the cutting velocity and acceleration of blade, the force co...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2015