Structure and Properties of Li-Si Alloys: A First-Principles Study
نویسندگان
چکیده
On the basis of density functional theory calculations, we present the energetics, structure, and electronic and mechanical properties of crystalline and amorphous Li-Si alloys. We also discuss the dynamic behavior of the alloys at finite temperatures based on ab initio molecular dynamics. When the Li content is sufficiently high, alloying between Li and Si is energetically favorable as evidenced by the negative mixing enthalpy; the alloy is most stable around 70 atom%Li in the crystalline phase and 70( 5 atom% Li in the amorphous phase. Our calculations unequivocally show that the incorporation of Li leads to disintegration of the tetrahedrally bonded Si network into small clusters of various shapes. Bader charge analysis shows that the charge state of Li remains nearly unchanged around þ0.8, while that of Si varies approximately from -0.5 to -3.3 depending on the number of Si neighbors as can be understood as Zintl-like phases. Electronic structure analysis highlights that the charge transfer leads to weakening or breaking of Si-Si bonds with the growing splitting between 3s and 3p states, and consequently, the Li-Si alloys soften with increasing Li content.
منابع مشابه
ساختار و خواص مغناطیسی آلیاژهای CoFeSiB انجماد سریع یافته
The effects of metalloids Si(4-27 at%) and B(5-22 at%) on the structure and magnetic properties of melt spun cobalt based alloys containing 5at% Fe have been studied. XRD results revealed that in non-eutectic ternary CoFeSi and CoFeB alloys, the additions of Si or B, alone can not lead to full amorphization of melt spun ribbons. In quaternary CoFeSiB alloys, the total amounts of Si and B additi...
متن کاملCooperative effect of silicon and other alloying elements on creep resistance of titanium alloys: insight from first-principles calculations
Creep resistance is one of the key properties of titanium (Ti) alloys for high temperature applications such as in aero engines and gas turbines. It has been widely recognized that moderate addition of Si, especially when added together with some other elements (X), e.g., Mo, significantly improves the creep resistance of Ti alloys. To provide some fundamental understandings on such a cooperati...
متن کاملFirst-Principles Investigation of Density of States and Electron Density in Wurtzite In0.5Ga0.5 N Alloys with GGA-PBEsol Method
In present work, we have calculated the electronic properties including density of states and electron density for GaN, InN and InxGa1-xN in wurtzite phase for x=0.5. The study is based on density functional theory with full potential linearized augmented plane wave method by generalized gradient approximation for calculating electronic properties. In this report we concluded that InxGa1-xN ba...
متن کاملHalf-metallic ferrimagnetism in the [Sc1−xVx]C and [Sc1−xVx]Si alloys adopting the zinc-blende and wurtzite structures from first-principles
Employing first-principles calculations we study the structural, electronic and magnetic properties of the [Sc1−xVx]C and [Sc1−xVx]Si alloys. In their equilibrium rocksalt structure all alloys are non-magnetic. The zincblende and wurtzite structures are degenerated with respect to the total energy. For all concentrations the alloys in these lattice structures are half-metallic with the gap loca...
متن کاملمشخصه یابی ساختاری و مغناطیسی آلیاژهای (Fe65-Co35)100-xSix تولید شده به روش آلیاژسازی مکانیکی
Fe-Co alloys have unique magnetic applications. Fe50Co50 alloy has the highest saturation magnetization value among Fe-Co alloys. Moreover, the introduction of Si into Fe can result in a decrease of magnetic anisotropy. In this study, in order to utilize combined advantages of Si and Co, the effect of adding 10 and 20 at.% Si on the microstructural and magnetic properties of Fe65Co35 alloy wa...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2011