Geophysical investigations and modeling of seismic response for a seismic microzoning study in Caracas, Venezuela

نویسنده

  • M. Schmitz
چکیده

One of the most important natural hazards that threatens Caracas, the capital city of Venezuela, is the seismic hazard, due to its location in the plate boundary zone between the South America and the Caribbean plates. There is historic evidence for several destructive earthquakes in Caracas since 1641, being the most recent one the 1967 Caracas earthquake. This magnitude 6.5 earthquake which occurred some 25 km northwest of Caracas generated heavy damage in distinct zones of the city, thus being the most intensely studied earthquake in Venezuela. Damage investigations of buildings , including soil and building dynamical characteristics, and the earthquake engineering characteristics of the deposits were performed in detail following the earthquake. Sediment thickness in excess of 300 m and related soil-structure interactions were identified as the principal factors for the damage distribution. Recent research projects reveal details of the geological and geophysical characteristics of the valley fill. In that respect, H/V ratios from microtremor measurements show values between 1 and 2 s for the deep sedimentary basins, whereas rock sites from outside the basin show a predominant period down to 0.2 s. The bedrock topography as well as seismic velocities and densities of the sediments are used as input information for the numerical modeling of the seismic response, which was done so far on detailed 2-D profiles across the valley. The results indicate that the depth of the distinct sedimentary layers is not the only crucial parameter for high amplification factors, but a combination of the characteristics of the sedimentary fill, the shape of the bedrock and resonance effects between adjacent sub-basins to the amplification of seismic waves. In addi

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Subsurface modeling of mud volcanoes, using density model and analysis of seismic velocity

Detection of subsurface structures by means of gravity method can be used to determine mass distribution and density contrast of rock units. This distribution could be detected by different geophysical methods, especially gravity method. However, gravity techniques have some drawbacks and can't be always successful in distinguishing subsurface structures. Performance of the gravity technique co...

متن کامل

A comparative study on pile group and piled raft foundations (PRF) behavior under seismic loading

Study on the seismic behavior of piled rafts and pile groups while the same amount of construction material and excavation is used in their construction, are the main objective of this research. The process where the raft interaction with soil can affect the seismic response and stress distribution is also discussed in the current study. By means, ABAQUS software was applied for the finite elem...

متن کامل

Seismic Evaluation of Flexible-Base Low-Rise Steel Frames Using Beam-On-Nonlinear-Winkler-Foundation Modeling of Shallow Footings

Recent investigations have shown that the influences of Soil-Structure Interaction (SSI) may be detrimental to the seismic response of structure, and hence neglecting this phenomenon in analysis and design may lead to an un-conservative design. The objective of this paper is to quantify the effects of nonlinear soil-structure interaction on the seismic response of a low-rise special moment fram...

متن کامل

3D and 4D Seismic Data Integration in Static and Dynamic Reservoir Modeling: A Review

Reservoir modeling is the process of generating numerical representations of reservoir conditions and properties on the basis of geological, geophysical, and engineering data measured on the Earth’s surface or in depth at a limited number of borehole locations. Therefore, reservoir modeling requires an incorporation of the data from a variety of sources, along with an integration of knowledge a...

متن کامل

QGIS geoprocessing model to simplify first level seismic microzonation analysis

The seismic microzonation evaluate the seismic hazard at the local scale proposing to identify areas of territory characterized by homogeneous seismic behaviors. The first level of seismic microzoning has the purpose of defining the lithological properties and geometry of geological units that characterize these portions of territory (microzones). The scope of this work is to contribute to the ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2005