An Investigation on Switching Behaviours of Vector Controlled Induction Motors
نویسندگان
چکیده
Field oriented control and direct torque control are the most popular methods in high performance industrial control applications for induction motors. Naturally, the strengths and weaknesses of each control method are available. Therefore, the selection of optimum control method is vitally important for many industrial applications. So, the advantages and the disadvantages of both control methods have to be well defined. In this paper, a new and different perspective has been presented regarding the comparison of the inverter switching behaviours on the FOC and the DTC drivers. For this purpose, the experimental studies have been carried out to compare the inverter switching frequencies and torque responses of induction motors in the FOC and the DTC systems. The dSPACE 1103 controller board has been programmed with Matlab/Simulink software. As expected, the experimental studies have showed that the FOC controlled motors have had a lessened torque ripple. On the other hand, the FOC controlled motor switching frequency has about 75% more than the DTC controlled.
منابع مشابه
Improved Direct Torque Control for Induction Machine Drives Based on Fuzzy Sector Theory
Here, a new fuzzy direct torque control algorithm for induction motors is proposed. As in the classical direct torque control, the inverter gate control signals directly come from the optimum switching voltage vector look-up table, the best voltage space vector selection is a key factor to obtain minimum torque and flux ripples. In the proposed approach, the best voltage space vector is sel...
متن کاملSensor-less Vector Control of a Novel Axial Field Flux-Switching Permanent-Magnet Motor with High-Performance Current Controller
Axial field flux switching motor with sandwiched permanent magnet (AFFSSPM) is a novel of flux switching motor. Based on the vector control method, the mathematical model of the AFFSSPM is derived and the operating performance of the AFFSSPM in the overall operating region is investigated.A novel control method for the AFFSSPM drive system, including the id =0, maximum torque per ampere, consta...
متن کاملTuning of fuzzy controller coefficients in direct torque control with space vector modulator for the three phase induction motors drive using Metaheuristic algorithms with considering electrical faults.
Among all the drive control methods of induction motors, the Direct Torque Control (DTC) method operates independently of the rotor parameters of the machine and, despite its simplicity, provides good torque control in both stable and transient modes. The use of residual comparators in these drives reduces the torque ripple and variable switching frequency. The most common solution is the use o...
متن کاملComparing of switching frequency on vector controlled asynchronous motor
Nowadays, asynchronous motors have wide range use in many industrial applications. Field oriented control (FOC) and direct torque control (DTC) are commonly used methods in high performance vector control for asynchronous motors. Therefore, it is very important to identify clearly advantages and disadvantages of both systems in the selection of appropriate control methods for many industrial ap...
متن کاملA New Fuzzy Logic Based Space Vector Modulation Approach on Direct Torque Controlled Induction Motors
The induction motors are indispensable motor types for industrial applications due to its wellknown advantages. Therefore, many kind of control scheme are proposed for induction motors over the past years and direct torque control has gained great importance inside of them due to fast dynamic torque response behavior and simple control structure. This paper suggests a new approach on the direct...
متن کامل