The Role of Interfaces in Deformation Twinning of Lamellar TiA1/Ti3A1Crystals
نویسنده
چکیده
The role of intakes in deformation twiming of Iamellar TiAl (ywl~l (a*) crystals creep deformed at an ekvated temperature have been investigated. Since the multiplication of lattice dislocations within both y and etzlamellae is very limited as a result of a refined lamekr microstmture, the gliding of interfheii dislocations on both y/a2 and y/y interfaces (i.e. interface sliding) becomes an important d40rmation mechanism. The movement of interfhcial dislocations, which glide in a cooperative fashion along the Iamellar interke.s, can be impeded by obstacles such as interface ledges, impinged lattice dislocations, and grain boundaries. The impediment of dislocation motion subsequently causes a dislocation pile-up in front of obstacle as creep strain accumulates. When the crystals deform at high stress kve~ deformation twinning becomes a predominant deformation mechanism. Deformation twins are fand to nucleate from the interfhees as a result of a local stress concentration generated from the dislocation pile-up. It is suggested that the deformation twinning in kunellar TiA1/Ti~l crystals can be viewed as a stress relaxation process to relieve the local stress concentration caused by the pile-up of interfhcial dislocations. An interfiwe-assisted twinning mechanism is accordingly proposed.
منابع مشابه
Creep Mechanisms and Interface-Enhanced Deformation Twinning in a Two-Phase _ Lamellar TiAl Alloy
Deformation mechanisms and the role of interfaces in deformation twinning of a two-phase [TiAI (y)GAl (ad] 1 amellar allo\t creep deformed at elevated temperatures have been investigated. Since the multiplication of lattice dislocations \vithin both y and a2 lamellae is verl\’ limited at a lo\v stress level due to a refined lamellar microstructure, the glide of interfacial dislocations on both ...
متن کاملDislocation/Twin/Interface Interactions during Deformation of PST TiAl Single Crystals, an AFM Study
PST TiAl crystals oriented such that the deformation axis lies in the (111) interfacial planes have been deformed in compression. This deformation produces so-called "channeled flow" in which the strain perpendicular to the (111) interfaces is zero, while the other two strains are equal and opposite in sign. Thus the sample simply shortens axially and spreads laterally in the channels defined b...
متن کاملRole of Interfacial Dislocations on Creep of a Fully Lamellar TiAl
Deformation mechanisms of a fully lamellar TiAl (γ lamellae: 100 ~ 300Ênm thick, α2 lamellae: 10 ~ 50 nm thick) crept at 760¡C have been investigated. It was found that, as a result of a fine structure, the motion and multiplication of dislocations within both γ and α2 lamellae are limited at low creep stresses (< 400 MPa). Thus, the glide and climb of lattice dislocations have insignificant co...
متن کاملDeformation twinning induced decomposition of lamellar LPSO structure and its re-precipitation in an Mg-Zn-Y alloy
The high hardness or yield strength of an alloy is known to benefit from the presence of small-scale precipitation, whose hardening effect is extensively applied in various engineering materials. Stability of the precipitates is of critical importance in maintaining the high performance of a material under mechanical loading. The long period stacking ordered (LPSO) structures play an important ...
متن کاملAbnormal Plastic Behavior of Fine Grain Mp35n Alloy During Room Temperature Tensile Testing
In this paper, results of an investigation on the strain hardening responses of superalloy MP35N with two average grain sizes of 38 and 1 μm, during room temperature tensile testing are reported. The microstructural evolution of the deformed samples was studied using optical and transmission electron microscopy (TEM) techniques. The strain hardening behavior of the 38 μm material was rather sim...
متن کامل