The Simulation, Design and Implementation of Bandpass Filters in Rectangular Waveguides
نویسندگان
چکیده
This paper presents the simulation, design and implementation of bandpass filters in rectangular waveguides. The filters are simulated and designed by using a numerical analysis program based on the Wave Iterative Method (WIM) called WFD (Waveguide Filter Design) simulation. This simulation program can analyze the electrical network of filters. The sample waveguide filter is designed based on a proposed structure consisting of three circuits serving as a simple bandpass filter with two inductive irises and three inductive irises in a cascade. We determined that the operating frequency was equal to approximately 4.20-4.84 GHz. The waveguide filters were then implemented using an aluminum material. The analyzed results for the inductive iris obtained with the WFD program agree well with the results of CST Microwave Studio®. Finally, the measured results of sample waveguide filters are consistent with the simulation tool.
منابع مشابه
Plasmonic bandpass filters with cascaded rectangular ring resonators.
We theoretically present the analysis and design of a nanoplasmonic bandpass filter with flat-top spectral characteristics by cascading a series of directly connected rectangular ring resonators based on metal-insulator-metal waveguides. Analyzed by the equivalent lumped circuit model of the transmission line to plasmonic waveguides, the transmission properties of a symmetric rectangular ring r...
متن کاملTunable Wideband Graphene based Filters in THz Band
In this paper, a procedure for analyzing and designing of tunable wideband band-pass and band-stop graphene based filters in the terahertz band is proposed. These planar wideband plasmonic filters are unique in their kind. With this procedure, it is possible to design filters with the desired functional characteristics in the form of the similar quarter-wavelength resonance stubs. The discontin...
متن کاملA Compact Ultra-Wideband Bandpass Filter with Sharp-Rejection using Complementary Split Ring Resonators
A compact and sharp-rejection ultra-wideband (UWB) microstrip band-pass filter (BPF) is developed using of left handed metamaterials realized by complementary split ring resonator (CSRR). Moreover, proposed structure consists of two doublets parallel coupling gaps at each side of a microstrip ring. In comparison with some other filters, this structure shows a significantly wider passband due to...
متن کاملCompact Bandpass Filters Utilizing Dielectric Filled Waveguides
Abstract—In this paper, a compact waveguide bandpass filter is proposed. The proposed structure consists of some inductive diaphragms in a rectangular waveguide and the regions between them have been filled fully by dielectrics. The relations between the physical and electrical parameters of the existed asymmetrical impedance invertors are obtained. The usefulness of the proposed structure and ...
متن کاملTransmittance of MIM Waveguides Containing Semi-Circular Ring Shaped and Rectangular Ring Shaped Grooves
In this paper the transmittance of metal-insulator-metal (MIM) waveguides containing semi-circular ring shaped and rectangular ring shaped grooves are investigated. By varying groove parameters their effects on the transmittance of the MIM waveguides are investigated. The results show that the transmittance spectra of the waveguides have maximum and minimum points, and by using appropriate para...
متن کامل