Effect of cotton padding on the setting properties of plaster slabs
نویسندگان
چکیده
INTRODUCTION Plaster of Paris (PoP) impregnated bandages have been used to maintain the position of bones and joints for over a century. Classically, wool dressing is applied to the limb before the PoP, which can then be moulded to the desired shape. A modification of this practice is to wrap the PoP bandages circumferentially in cotton before wetting and applying to the patient in an attempt to reduce inhalation of plaster dust and reduce mess. However, this may affect the water content of the cast and therefore also its setting properties and strength. This study compared the setting properties of PoP casts when used with and without cotton wrapping. METHODS Sixty specimens, compliant with the American Society for Testing and Materials standards for three-point bending tests, were prepared, with thirty wrapped in cotton. All were weighed before and after water immersion, and wrapped around a plastic cylinder to mimic limb application. Bending stiffness and yield strength was measured on a servohydraulic materials testing machine at 2, 6, 12, 24, 48 and 72 hours. RESULTS The water content of cotton-wrapped plaster was significantly higher (50%) than that of standard plaster. It had significantly lower strength up to 24 hours and significantly lower stiffness up to 72 hours. CONCLUSIONS The initial decrease in strength and stiffness of the cast wrapped in cotton may comprise the ability of the backslab to hold the joint or bone in an optimal position. Any modification of the standard plaster slab application technique should allow for the potential adverse effects on the plaster setting properties.
منابع مشابه
Factors contributing to the temperature beneath plaster or fiberglass cast material
BACKGROUND Most cast materials mature and harden via an exothermic reaction. Although rare, thermal injuries secondary to casting can occur. The purpose of this study was to evaluate factors that contribute to the elevated temperature beneath a cast and, more specifically, evaluate the differences of modern casting materials including fiberglass and prefabricated splints. METHODS The temperat...
متن کاملStudy on the Damaging of Dyed Cotton Fibers with Direct Dye in Spinning Processes and its Effect on the Properties of Cotton Mélange Yarn
The influence of dyeing and spinning on the characteristics of cotton fibers and its impact on the properties of cotton mélange yarn has been investigated. Grey cotton fibers with mean fiber length and fineness of 29 mm and 4.2 micronair were pre-treated and dyed. Three ring yarns were spun from 100 % grey cotton (R.R.Y), 50-50 % blend of dyed and grey cotton (M.R.Y) and 100 % dyed cotton fiber...
متن کاملEffect of Fluorination Treatment on Cotton Wettability, Dyeability and Mechanical Properties and Characterization of Surface Changes by XPS
Cotton fabric was treated with fluorine gas in a nitrogen atmosphere. The effect of fluorination treatments on wettability, whiteness index, dyeability and mechanical properties of cotton fabrics were assessed. Kawabata analysis shows that fluorination treatment increases shear stiffness G, shear hysteresis 2HG5, bending stiffness B and overall fabric stiffness Koshi on cotton fabric. Fluorinat...
متن کاملEffect of Verticillium dahliae Kleb. on cotton yield and fiber technological properties
The objective of this study was to determine the effect of Verticillium dahliae Kleb. on cotton yield and fiber technological properties, relationships among to disease and seed cotton yield, fiber yield and fiber technological properties and also determine susceptible and tolerant cotton varieties. The study was conducted in the Southeastern Anatolia Agricultural Research Institute’s exper...
متن کاملHot Mercerizing of Cotton/Polyester Blend Fabric Effect of Alkali Treatment Temperature on Ttensile Properties , Weight Loss and Shrinkage of Fabric
The presence of defects in cold mercerizing of cotton goods led to the creation of a new method, called hot mercerizing in which caustic soda solution is used at a high temperature. Hot mercerizing is successfully used in cotton blended with some other fibers. In cotton/polyester blend fabrics, this treatment serves a dual purpose: subjectively, it imparts a silklike soft handle to the po...
متن کامل