Mechanical Properties of Titanium Processed by Hydrostatic Extrusion Właściwości Mechaniczne Tytanu Wyciskanego Hydrostatycznie
نویسندگان
چکیده
The mechanical properties of titanium Grade 2 subjected to the hydrostatic extrusion technique (HE) were investigated. The hydrostatic extrusion technique is a method which refines the titanium grains to a nano-metric size. Compared with coarse grained titanium (CG-Ti), nanocrystalline titanium (NC-Ti) is characterized by a much higher yield stress, tensile strength and microhardness. The yield stress of NC-Ti determined in tensile tests is higher than that measured in compression test. The Young modulus of NC-Ti is slightly lower than that of CG-Ti.
منابع مشابه
Experimental and Finite Element Analyses of the Hydrostatic Cyclic Expansion Extrusion (HCEE) Process with Back-Pressure
It is generally known that severe plastic deformation processes with back pressure not only apply higher hydrostatic stress and more deformation compared to what a regular process can apply to a workpiece but also prevent surface defects in the workpiece during the process. Hydrostatic cyclic expansion extrusion (HCEE) was developed recently for processing long ultrafine-grained metals and allo...
متن کاملNANOSTRUCTURED MATERIALS Progress in hydrostatic extrusion of titanium
At the beginning of the present century it has been demonstrated that nanocrystalline titanium (NC-Ti) can be fabricated by hydrostatic extrusion (HE) which is one of the severe plastic deformation method. NC-Ti obtained in such a way exhibited excellent mechanical properties. The influence of HE on the microstructure and mechanical properties of titanium Grade 2 was first analyzed in 2005. In ...
متن کاملEffects of Hot-Hydrostatic Canned Extrusion on the Stock Utilization, Microstructure and Mechanical Properties of TiBw/TC4 Composites with Quasi-Continuous Network
In-situ TiB whisker-reinforced Ti-6Al-4V (TC4) titanium matrix composites (TiBw/TC4) with quasi-continuous networks were successfully fabricated by vacuum hot-pressing sintering. The effects of the hot-hydrostatic canned extrusion on stock utilization, microstructure and mechanical properties of the TiBw/TC4 composites were investigated. It was satisfactory that the utilization of composites co...
متن کاملFinite Element Simulation of Hydrostatic Extrusion Process to Produce Thin Bimetallic Parts
The hydrostatic extrusion is a new method of extrusion process. The most important advantage of this method is reduction of friction and close tolerance for the coating thickness. In this study, the hydrostatic extrusion simulation of bimetallic wires has performed using of finite element method. In the following the advantages of hydrostatic extrusion compared to the direct extrusion are prese...
متن کاملFinite Element Simulation of Hydrostatic Extrusion Process to Produce Thin Bimetallic Parts
The hydrostatic extrusion is a new method of extrusion process. The most important advantage of this method is reduction of friction and close tolerance for the coating thickness. In this study, the hydrostatic extrusion simulation of bimetallic wires has performed using of finite element method. In the following the advantages of hydrostatic extrusion compared to the direct extrusion are prese...
متن کامل