In vitro comparison of novel polyurethane aortic valves and homografts after seeding and conditioning.

نویسندگان

  • Nikolaus Thierfelder
  • Fabian Koenig
  • René Bombien
  • Cornelia Fano
  • Bruno Reichart
  • Erich Wintermantel
  • Christoph Schmitz
  • Bassil Akra
چکیده

The aim of the study was to compare the behavior of seeded cells on synthetic and natural aortic valve scaffolds during a low-flow conditioning period. Polyurethane (group A) and aortic homograft valves (group B) were consecutively seeded with human fibroblasts (FB), and endothelial cells (EC) using a rotating seeding device. Each seeding procedure was followed by an exposure to low pulsatile flow in a dynamic bioreactor for 5 days. For further analysis, samples were taken before and after conditioning. Scanning electron microscopy showed confluent cell layers in both groups. Immunohistochemical analysis showed the presence of EC and FB before and after conditioning as well as the establishment of an extracellular matrix (ECM) during conditioning. A higher expression of ECM was observed on the scaffolds' inner surface. Real-time polymerase chain reaction showed higher inflammatory response during the conditioning of homografts. Endothelialization caused a decrease in inflammatory gene expression. The efficient colonization, the establishment of an ECM, and the comparable inflammatory cell reaction to the scaffolds in both groups proved the biocompatibility of the synthetic scaffold. The newly developed bioreactor permits conditioning and cell adaption to shear stress. Therefore, polyurethane valve scaffolds may offer a new option for aortic valve replacement.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Use of a special bioreactor for the cultivation of a new flexible polyurethane scaffold for aortic valve tissue engineering

BACKGROUND Tissue engineering represents a promising new method for treating heart valve diseases. The aim of this study was evaluate the importance of conditioning procedures of tissue engineered polyurethane heart valve prostheses by the comparison of static and dynamic cultivation methods. METHODS Human vascular endothelial cells (ECs) and fibroblasts (FBs) were obtained from saphenous vei...

متن کامل

Functional tissue engineering of the aortic heart valve.

INTRODUCTION Aortic heart valve dysfunction is commonly treated with replacement of the valve. To overcome the shortcomings of currently used mechanical valves, xenografts and homografts, efforts are being made to create fully autologous heart valve replacements using the concepts of tissue engineering. To this end autologous cells are seeded onto pre-shaped biodegradable scaffolds and cultured...

متن کامل

The fate of aortic valve homografts 12 to 17 years after implantation.

Results of long-term follow-up of an early cohort of patients receiving aortic valve homografts for aortic stenosis and aortic insufficiency are presented. All patients were operated upon by a single surgeon from 1966 to 1971. Eighty-three patients underwent insertion of 85 homograft aortic valves. Homografts were sterilized with either betapropiolactone (39 valves) or gamma irradiation (41 val...

متن کامل

Comparison of Clinical Outcomes Seprate and semi continus sewing methods during and after Heart valves Surgery

Background and Aims: Various therapies and surgeries are applied in heart valve surgery, including interrupted and semi-continuous suture techniques. Therefore, this study aimed to compare the clinical implications of two methods of interrupted and semi-continuous suture techniques during and after mitral or aortic valve replacement surgery among patients referred to Department of Surgery, Scho...

متن کامل

Noninvasive analysis of synthetic and decellularized scaffolds for heart valve tissue engineering.

Microcomputed tomography (µ-CT) is a nondestructive, high-resolution, three-dimensional method of analyzing objects. The aim of this study was to evaluate the feasibility of using µ-CT as a noninvasive method of evaluation for tissue-engineering applications. The polyurethane aortic heart valve scaffold was produced using a spraying technique. Cryopreserved/thawed homograft and biological heart...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • ASAIO journal

دوره 59 3  شماره 

صفحات  -

تاریخ انتشار 2013