Assesment of PM10 pollution episodes in a ceramic cluster (NE Spain): proposal of a new quality index for PM10, As, Cd, Ni and Pb.
نویسندگان
چکیده
Environmental pollution control is one of the most important goals in pollution risk assessment today. In this sense, modern and precise tools that allow scientists to evaluate, quantify and predict air pollution are of particular interest. Monitoring atmospheric particulate matter is a challenge faced by the European Union. Specific rules on this subject are being developed (Directive 2004/107/EC, Directive 2008/50/EC) in order to reduce the potential adverse effects on human health caused by air pollution. Air pollution has two sources: natural and anthropogenic. Contributions from natural sources can be assessed but cannot be controlled, while emissions from anthropogenic sources can be controlled; monitoring to reduce this latter type of pollution should therefore be carried out. In this paper, we describe an air quality evaluation in terms of levels of atmospheric particles (PM10), as outlined by European Union legislation, carried out in an industrialised Spanish coastal area over a five-year period with the purpose of comparing these values with those of other areas in the Mediterranean Basin with different weather conditions from North of Europe. The study area is in the province of Castellón. This province is a strategic area in the frame work of European Union (EU) pollution control. Approximately 80% of European ceramic tiles and ceramic frit manufacturers are concentrated in two areas, forming the so-called "ceramics clusters"; ones in Modena (Italy) and the other in Castellón. In this kind of areas, there are a lot of air pollutants from this industry then it is difficult to fulfill de European limits of PM10 so it is necessary to control the air quality in them. The seasonal differences in the number of days in which pollutant level limits were exceeded were evaluated and the sources of contamination were identified. Air quality indexes for each pollutant have been established to determine easily and clearly the quality of air breathed. Furthermore, in accordance with Directive 2008/50/EC, an Air Quality Plan is proposed to protect human health, and the environment as a whole, in the study area. General and specific corrective measures of main emission sources are provided. A strategy for air pollution management is thus presented.
منابع مشابه
Road Traffic and PM10, PM2.5 Emission at an Urban Area in Algeria: Identification and Statistical Analysis
Air quality in greater Algiers, in Algeria was assessed analyzing aerosol particulate matter (PM10 and PM2.5) at a site influenced by heavy road traffic. Particulate matters were collected using a Gent sampler to characterize the atmospheric aerosol of Algiers. An Energy dispersive X ray spectrometer (EDXRF) was used to determine the heavy metal concentrations in the PM2.5 and PM10 size fractio...
متن کاملRoad Traffic and PM10, PM2.5 Emission at an Urban Area in Algeria: Identification and Statistical Analysis
Air quality in greater Algiers, in Algeria was assessed analyzing aerosol particulate matter (PM10 and PM2.5) at a site influenced by heavy road traffic. Particulate matters were collected using a Gent sampler to characterize the atmospheric aerosol of Algiers. An Energy dispersive X ray spectrometer (EDXRF) was used to determine the heavy metal concentrations in the PM2.5 and PM10 size fractio...
متن کاملThe evaluation of heavy metals concentration related to PM10 in ambient air of Ahvaz city, Iran
Airborne particulate matter along with volatile organic compounds, heavy metals, and other compounds have raised many concerns to many countries including Iran. In this study, the concentrations of seven heavy metals (Cd, Cr, Co, Ni, Pb, Zn, and Al) associated with PM10 have been investigated during normal and dusty days from September to February 2012. The mean PM10 concentrations on the norma...
متن کاملDispersion and Health Risk Assessment of PM10 Emitted from the Stacks of a Ceramic and Tile industry in Ardakan, Yazd, Iran, Using the AERMOD Model
Background: In developing countries, air pollution caused by industries constitutes a serious threat to public health. The present study was conducted to determine the dispersion patern and assess the health risks of PM10 emitted from the stacks of a ceramic and tile factory. Materials and Methods: The present descriptive-cross sectional study was performed on a tile and ceramic industry in Ard...
متن کاملEvaluation of the contribution of local sources to trace metals levels in urban PM2.5 and PM10 in the Cantabria region (Northern Spain).
The aim of this study was to evaluate the contribution of local emission sources to the selected trace metals levels (As, Ni, Cd, Pb, Ti, V, Mn, Cu, Mo and Hg) in urban particulate matter, PM10 and PM2.5, in the Cantabria region (Northern Spain) during the year 2008. PM10 and PM2.5 samples were collected and characterized in an urban sampling site at Santander (Cantabria); additional PM10 sampl...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Journal of environmental management
دوره 108 شماره
صفحات -
تاریخ انتشار 2012