Stiffness Matrix Analysis of Six-revolute Serial Manipulator
نویسندگان
چکیده
This paper presents a simple procedure that can be used to determine the stiffness matrix of 6R serial manipulator in selected points of the work space with joint stiffness coefficients taking into account. Elastokinematical model for the robot manipulator FANUC S-420F was considered as spatial and serial kinematical chain composed of six rigid links, connected by ideal revolute joint (without clearances and deformable elements), with torsion elasticity of the joint drive system (relative torsion deformations are proportional to acted torques) taking into account. Assumed model is used for displacement analysis of the end-effector for a given applied force in quasi-static condition. The analysis results are presented as Cartesian stiffness matrix of studied manipulator.
منابع مشابه
The Kinematic design of a 3-dof Hybrid Manipulator
This paper focuses on the kinematic properties of a new three-degree-of-freedom hybrid manipulator. This manipulator is obtained by adding in series to a five-bar planar mechanism (similar to the one studied by Bajpai and Roth [1]) a third revolute passing through the line of centers of the two actuated revolute joints of the above linkage (Figures 2 & 3). The resulting architecture is hybrid i...
متن کاملStiffness control of a legged robot equipped with a serial manipulator in stance phase
The ability to perform different tasks by a serial manipulator mounted on legged robots, increases the capabilities of the robot. The position/force control problem of such a robot in the stance phase with point contacts on the ground is investigated here. A target plane with known stiffness is specified in the workspace. Active joints of the legs and serial manipulator are used to exert the de...
متن کاملSimulation of Industrial Manipulators Based on the UDU<Superscript><Emphasis Type="Italic">T</Emphasis></Superscript> Decomposition of Inertia Matrix
The UDUT – U and D are respectively the upper triangular and diagonal matrices – decomposition of the generalized inertia matrix of an n-link serial manipulator, introduced elsewhere, is used here for the simulation of industrial manipulators which are mainly of serial type. The decomposition is based on the application of the Gaussian elimination rules to the recursive expressions of the eleme...
متن کاملModel and Approaches for Tension of Parallel Structures with Elastic Joints for Micro and Nano Manipulators
In this paper piezo actuated micromanipulators are considered with serial-parallel structure including elastic joints. Such structure allows a preliminary tension of the mechanical system in order to eliminate backlashes and to improve the performance of the piezo-actuators. A kinematics model of a serial-parallel structure for local micro manipulators is build here. A pseudo rigid body approac...
متن کاملJoint Stiffness Identification of Six-revolute Industrial Serial Robots
HAL is a multi-disciplinary open access archive for the deposit and dissemination of scientific research documents, whether they are published or not. The documents may come from teaching and research institutions in France or abroad, or from public or private research centers. L’archive ouverte pluridisciplinaire HAL, est destinée au dépôt et à la diffusion de documents scientifiques de niveau...
متن کامل