Modeling and Simulation of A Laser Deposition Process
نویسندگان
چکیده
Abstract A laser deposition process involves the supply of metallic powders into a laser-heated spot where the powder is melted and forms a melt puddle which quickly solidifies into a bead. In order to design an effective system, the laser beam, the powder beam, and their interactions need to be fully understood. In this paper, the laser-material interaction within the melt pool is reported using a multi-scale model: a macroscopic model to model mass, heat, and momentum transfer. Experiments were also conducted to validate the simulation model.
منابع مشابه
Effect of Pullback Speed and the Distance between the Skin and Vein on the Performance of Endovenous Laser Treatment by Numerical Simulation
Introduction: Endovenous laser treatment (ELT) is a new treatment method for the reflux of the great saphenous vein. A successful ELT is dependent on the selection of optimum parameters required to achieve optimal vein damage while avoiding side effects including skin burns. The mathematical modeling of ELT can be used to understand the process of ELT. This study was conducted to examine the ef...
متن کاملAn Investigation of Asphaltene Deposition Mechanisms During Natural Depletion Process by a Two Phase Modeling Using Genetic Algorithm Technique
In this work, the natural depletion process in sandstone and carbonate cores was modeled to investigate the asphaltene deposition mechanisms. A new permeability reduction correlation was proposed based on the Minssieux model that considers a combination of surface deposition, pore throat plugging, and filtration cake mechanisms. The results showed that the filtration cake is a dominant asphalte...
متن کاملAsphaltene Deposition Modeling during Natural Depletion and Developing a New Method for Multiphase Flash Calculation
The specific objective of this paper is to develop a fully implicit compositional simulator for modeling asphaltene deposition during natural depletion. In this study, a mathematical model for asphaltene deposition modeling is presented followed by the solution approach using the fully implicit scheme. A thermodynamic model for asphaltene precipitation and the numerical methods for performing f...
متن کاملNumerical Simulation Of Heat Affected Zone Microstructure During Laser Surface Melting
Microstructural changes during laser welding and laser surface treatment has been regarded by many researchers. Most researches have focused on studying the effect of various process parameters on the size and microstructure of the heat affected zone. But some studies show that the initial microstructure of the base metal can also affect the heat affected zone dimensions and final microstructur...
متن کاملFinite-Difference Time-Domain Simulation of Light Propagation in 2D Periodic and Quasi-Periodic Photonic Structures
Ultra-short pulse is a promising technology for achieving ultra-high data rate transmission which is required to follow the increased demand of data transport over an optical communication system. Therefore, the propagation of such type of pulses and the effects that it may suffer during its transmission through an optical waveguide has received a great deal of attention in the recent years. We...
متن کاملMODELING OF ASPHALTENE DEPOSITION IN PIPELINES
This paper is concerned with asphaltene deposition in fluid flowing through pipelines. Brownian diffusion and drag, gravitational, thermophoresis, buoyancy, and shear removal are considered as possible mechanisms in the asphaltene deposition process. The thermo-physical properties of the fluid were obtained from Iranian oil fields. A model was used in the pipeline deposition modeling to predict...
متن کامل