On the biodegradability, mechanical behavior, and cytocompatibility of amorphous Mg72 Zn23 Ca5 and crystalline Mg70 Zn23 Ca5 Pd2 alloys as temporary implant materials.
نویسندگان
چکیده
The evolution of microstructure and mechanical properties of almost fully amorphous Mg(72) Zn(23) Ca(5) and crystalline Mg(70) Zn(23) Ca(5) Pd(2) alloys during immersion in Hank's balanced salt solution (HBSS), as well as their cytocompatibility, are investigated in order to assess the feasibility of both materials as biodegradable implants. Though the crystalline Mg(70) Zn(23) Ca(5) Pd(2) sample shows lower wettability and more positive corrosion potential, this sample degrades much faster upon incubation in HBSS as a consequence of the formation of micro-galvanic couples between the nobler Pd-rich dendrites and the surrounding phases. After 22-h immersion, the concentration of Mg ions in the HBSS medium containing the Mg(70) Zn(23) Ca(5) Pd(2) sample is six times larger than for Mg(72) Zn(23) Ca(5) . Due to the Zn enrichment and the incipient porosity, the mechanical properties of the Mg(72) Zn(23) Ca(5) sample improve within the first stages of biodegradation (i.e., hardness increases while the Young's modulus decreases, thus rendering an enhanced wear resistance). Cytocompatibility studies reveal that neither Mg(72) Zn(23) Ca(5) nor Mg(70) Zn(23) Ca(5) Pd(2) are cytotoxic, although preosteoblast cell adhesion is to some extent precluded, particularly onto the surface of Mg(70) Zn(23) Ca(5) Pd(2) , because of the relatively high hydrophobicity. Because of their outstanding properties and their time-evolution, the use of the Pd-free alloy in temporary implants such as screws, stents, and sutures is envisioned.
منابع مشابه
Effect of Ni on Amorphization of Ti-Cu-Ni Ternary alloys Prepared by Mechanical alloying
Amorphous alloys has been taken into consideration because of their unique properties and are nominated as the future engineering materials. In this research, the effect of Ni and milling time on amorphization process and thermal stability of Ti50Cu50-xNix(x=10, 15, 25 at%) alloy system were investigated. The evolution of amorphization during milling, thermal stability and subsequent heat treat...
متن کاملProperties and Crystallization Phenomena in Li2Si2O5–Ca5(PO4)3F and Li2Si2O5–Sr5(PO4)3F Glass–Ceramics Via Twofold Internal Crystallization
The combination of specific mechanical, esthetic, and chemical properties is decisive for the application of materials in prosthodontics. Controlled twofold crystallization provides a powerful tool to produce special property combinations for glass-ceramic materials. The present study outlines the potential of precipitating Ca5(PO4)3F as well as Sr5(PO4)3F as minor crystal phases in Li2Si2O5 gl...
متن کاملProduction and Characterization of Nano Crystalline Fe85Si10Ni5 Soft Magnetic Alloys by Mechanical Alloying
Abstract There are various methods to produce iron based nano crystalline magnetic alloys. Among these methods, mechanical alloying is one of the most important. In this research, nano crystalline Fe85Si10Ni5 soft magnetic alloy was synthesized by mechanical alloying. The effect of alloying time on phase constituents and magnetic properties of the produced powders was investigated, by X-ray di...
متن کاملAn Overview of Hydrogen Interaction with Amorphous Alloys
Theories, experimental results and applications associated with hydrogen behavior in amorphous metals and alloys are reviewed. An emphasis is made on the potential use of these advanced materials for hydrogen storage technology. Therefore, several properties that are especially relevant for such applications are assessed. These include structural models for hydrogen occupancy, sorption characte...
متن کاملEnhanced mechanical properties and in vitro corrosion behavior of amorphous and devitrified Ti40Zr10Cu38Pd12 metallic glass.
The effects of annealing treatments on the microstructure, elastic/mechanical properties, wear resistance and corrosion behavior of rod-shaped Ti40Zr10Cu38Pd12 bulk glassy alloys, synthesized by copper mold casting, are investigated. Formation of ultrafine crystals embedded in an amorphous matrix is observed for intermediate annealing temperatures, whereas a fully crystalline microstructure dev...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Journal of biomedical materials research. Part A
دوره 101 2 شماره
صفحات -
تاریخ انتشار 2013