Analytical and numerical determination of the elastic interaction energy between glissile dislocations and stacking fault tetrahedra in FCC metals
نویسندگان
چکیده
Understanding flow localization in materials containing high concentrations of Stacking Fault Tetrahedra (SFT’s) depends on delineation of the mechanisms by which they are destroyed as effective dislocation obstacles. The elastic interaction between glissile dislocations and SFT’s in FCC metals is examined, both analytically and numerically. Numerical calculations are performed for both full and truncated tetrahedra interacting with edge dislocations, while a new analytical formula is derived for the elastic energy of a full tetrahedron-dislocation system. Calculations confirm that the stress field of glissile dislocations is not sufficient to re-configure SFT’s into faulted Frank loops by reverse glide of stair-rod dislocations. This mechanism of SFT destruction by shear unfaulting of Frank loops seems to be unlikely. It is proposed that the destruction of SFT’s in irradiated materials is enabled by dislocation drag of interstitial clusters, followed by subsequent recombination and melting of the SFT core. © 2001 Elsevier Science B.V. All rights reserved.
منابع مشابه
Mechanisms of dislocation-defect interactions in irradiated metals investigated by computer simulations
During irradiation, mobile defects, defect clusters and impurity atoms segregate on dislocations. When an external stress is applied, plastic flow is initiated when dislocations are unlocked from segregated defects. Sustained plasticity is achieved by continuation of dislocation motion, overcoming local forces due to dispersed defects and impurities. The phenomena of flow localization, post-yie...
متن کاملAtomic-scale dynamic process of deformation-induced stacking fault tetrahedra in gold nanocrystals.
Stacking fault tetrahedra, the three-dimensional crystalline defects bounded by stacking faults and stair-rod dislocations, are often observed in quenched or irradiated face-centred cubic metals and alloys. All of the stacking fault tetrahedra experimentally observed to date are believed to originate from vacancies. Here we report, in contrast to the classical vacancy-originated ones, a new kin...
متن کامل1 Dislocation nucleation and vacancy formation during high - speed deformation of fcc metals
Recently, a dislocation free deformation mechanism was proposed by Kiritani et al., based on a series of experiments where thin foils of fcc metals were deformed at very high strain rates. In the experimental study, they observed a large density of stacking fault tetrahedra, but very low dislocation densities in the foils after deformation. This was interpreted as evidence for a new dislocation...
متن کاملDislocation nucleation and vacancy formation during high - speed deformation of fcc metals
Recently, a dislocation free deformation mechanism was proposed by Kiritani et al., based on a series of experiments where thin foils of fcc metals were deformed at very high strain rates. In the experimental study, they observed a large density of stacking fault tetrahedra, but very low dislocation densities in the foils after deformation. This was interpreted as evidence for a new dislocation...
متن کاملKinetic model for mechanical twinning and its application for intensive loading of metals
In this report, we present our twinning model intended for simulation of the dynamic deformation of metals with low values of the stacking fault energy, as well as the results of application of the model to numerical simulation of intensive loading of metals. Generation of a twin is described as an appearance of a stacking fault with size more than some critical value, while growth of a twin is...
متن کامل