Friction and Wear Testing Can Steer the Development of Ceramic Tribo Materials
نویسندگان
چکیده
The development of materials for tribological applications requires test methods for the determination of friction and wear behaviour of these materials. One of many different test methods useful for this task is the "oscillating sliding test", working with a ball-on-disk configuration. This test is applicable on rather small specimens and can provide preliminary information on friction and wear behaviour of materials. Features of this test method and some benefits are described.
منابع مشابه
The Wear Behavior of Textured Steel Sliding against Polymers
Artificially fabricated surface textures can significantly improve the friction and wear resistance of a tribological contact. Recently, this surface texturing technique has been applied to polymer materials to improve their tribological performance. However, the wear behavior of textured tribo-pairs made of steel and polymer materials has been less thoroughly investigated and is not well under...
متن کاملPin-on-Disc Study of Tribological Performance of Standard and Sintered Gear Materials Treated with Triboconditioning Process: Pre-treatment by Pressure-induced Tribo-film formation
Coating is one of the innovative approaches used to improve the wear resistance and load-carrying capacity of surfaces in rolling-sliding contact, such as gears and rolling element bearings. In this study, the tribological performance of standard gear material (EN 16MnCr5) and two kinds of powder metallurgy (PM) gear material (Distaloy AQ + 0.2% C and Astaloy 85Mo +0.2% C) with and without trib...
متن کاملWear mapping of CoCrMo alloy in simulated bio-tribocorrosion conditions of a hip prosthesis bearing in calf serum solution.
Wear maps were developed following a series of micro-abrasion-corrosion testing during idealised hip contact conditions for a CoCrMo alloy in a foetal calf serum solution. The main aim of the study was to characterise wear-corrosion or bio-tribocorrosion regimes of the alloy over a range of applied loads and applied potentials. The transitioning micro-abrasion-corrosion mechanisms, synergisms a...
متن کاملNanomaterials and Nanotechnology Comparison Between Nano- and Micro-Sized Copper Particles as Fillers in NAO Friction Materials
In this study, the comparative role of nano‐ and micro‐sized Cu powder in exploring the influence on the tribo‐performance of friction materials in the form of brake‐pads is discussed. Two friction composites were developed by keeping allthe ingredients constant and varying the size of the selected filler (copper powder). The developed micro‐composite contained 10 % ...
متن کاملProduction of Dispersed Ceramic Nano-Particles in Al Alloy Using Friction Stir Processing
In this research, surface composite layers containing nano sized TiB2, Al2O3-TiB2, ZrO2 and CNT particles have been fabricated on Aluminum alloy substrates by friction stir processing. The effects of different processing variables such as number of passes and strengthening particle distribution, hardness, and wear properties of surface nano...
متن کامل