Formation and Characterization of Mefenamic acid-Nicotinamide Cocrystal during Co-milling based on X-ray Powder Diffraction Analysis
نویسندگان
چکیده
Article history: Received on: 11/05/2016 Revised on: 30/06/2016 Accepted on: 16/08/2016 Available online: 29/10/2016 Mefenamic acid (MFA) and Nicotinamide (NIC) cocrystal formation in co-milling treatment was investigated by x-ray powder diffractometry (XRPD). Two polymorphic form of Mefenamic acid (MFA form I and MFA form II) were used to form a cocrystal with nicotinamide. Co-milling treatment was carried out at room temperature in a 1:2 molar ratio of MFA and NIC for various times up to 60 min. Samples were analyzed by XRPD. The XRPD showed that MFA form I and MFA form II formed cocrystal with NIC in the same diffractograms pattern. There was no intermediate amorphous form during milling process. The cocrystal formation mechanism was predicted via intermediate eutectic mixtures. The cocrystal formation from MFA form II (15 min) was faster than from MFA form I (45 min) which may explained by variations unit cell dimensions of MFA form I and MFA form II and also the polymorphic transformation of MFA form I.
منابع مشابه
Structural Characterization and Ordering Transformation of Mechanically Alloyed Nanocrystalline Fe-28Al Powder
The synthesis of nanocrystalline Fe3Al powder by mechanical alloying as well as the structural ordering of the synthesized Fe3Al particles during the subsequent thermal analysis were investigated. Mechanical alloying was performed up to 100 hours using a planetary ball mill apparatus with rotational speed of 300 rpm under argon atmosphere at ambient temperature. The synthesized powders were cha...
متن کاملNano-Crystalline Mg(2-x)MnxNi Compounds Synthesized by Mechanical Alloying: Microstructure and Electrochemistry
Mechanical alloying of binary and ternary elemental powder mixtures with the nominal compositions of Mg2Ni and Mg(2-x)MnxNi (x= 0, 0.05, 0.10 and 0.15 at. %) were carried out in a planetary ball mill for various milling times of 5, 10, 15, 20, 30 and 60 h. X-ray diffraction and field emission scanning and transmission electron microscopy were used for the characterization of the milled products...
متن کاملPreparation and Characterization of Carbamazepine Cocrystal in Polymer Solution
In this study, we attempted to prepare carbamazepine (CBZ) cocrystal through the solution method in ethanol-water solvent mixture (volume ratio 1:1) and polyvinyl pyrrolidone (PVP) solution. Nicotinamide (NIC) and saccharin (SAC) were selected as cocrystal coformers. Cocrystal screening products were characterized by Fourier Transform Infrared Spectroscopy (FTIR), Differential Scanning Calorime...
متن کاملHigh-throughput cocrystal slurry screening by use of in situ Raman microscopy and multi-well plate.
Cocrystal has attracted much attention in order to improve poor physicochemical properties, since cocrystal former crystallize with the ionic drugs as well as nonionic drugs. Cocrystal screening was usually conducted by crystallization, slurry and co-grinding techniques, however sensitivity, cost and time for screening were limited because of issues such as dissociation of cocrystal during crys...
متن کاملSynthesis and Characterization of CoBaO2.70 Nanoparticle with Ferromagnetic Properties
In this research we report synthesis of new Barium- Cobalt precursor complex with 2,6- pyridine dicarboxylic acid (dipic).Thecomplex[Ba(H2O)6][Co(dipic)2[(1)has been characterized using spectral methods (FT-IR, UV–Vis),elemental analysis and Cyclic voltammetric (CV) method. Also in this study we report thermal decomposition of inorganic precursor complex of (1).Characterization of the binary ox...
متن کامل