Three-Dimensional Continuous Displacement Measurement with Temporal Speckle Pattern Interferometry
نویسندگان
چکیده
A speckle interferometer which can measure whole field three-dimensional displacements continuously and dynamically has been built. Three different wavelength lasers are used to produce the speckle interferograms of the two in-plane displacements (displacements in the x- and y-direction) and one out-of-plane displacement (displacement in the z-direction), respectively. One color CCD camera is employed to collect these mixed speckle interferograms simultaneously. The mixed interferograms are separated by the Red, Green and Blue channels of the color CCD camera, and then are processed by the wavelet transform technique to extract the phase information of the measured object. The preliminary experiment is carried out to demonstrate the performance of this new device.
منابع مشابه
Combined Shearography and Speckle Pattern Photography for Single-Access Multi-Component Surface Strain Measurement
Full surface strain measurement requires the determination of two out-of-plane and four in-plane displacement gradient components of the surface strain tensor. Shearography is a full-field speckle interferometry technique with a sensitivity predominately to the out-of-plane displacement gradient. Speckle pattern photography has the sensitivity to the in-plane displacement, and taking the deriva...
متن کاملTemporal wavelet analysis for deformation and velocity measurement in speckle interferometry
Y. Fu C. J. Tay C. Quan L. J. Chen National University of Singapore Department of Mechanical Engineering 10 Kent Ridge Crescent Singapore 119260 Abstract. When a continuously deforming object is measured by electronic speckle pattern interferometry (ESPI), the speckle pattern recorded on a camera sensor changes constantly. These time-dependent speckle patterns would provide the deformation hist...
متن کاملElectronic speckle pattern interferometry for simultaneous measurement of out-of-plane displacement and slope.
An optical configuration is presented for simultaneous measurement of out-of-plane displacement and slope change in electronic speckle pattern interferometry. Experimental results for a rectangular plate clamped along the edges and loaded at the center are presented.
متن کاملA Method for Real Time and Continuous Acquisition of Interferogram of ESPI for Non-Destructive Evaluation
Electronic Speckle Pattern Interferometry (ESPI) is a highly sensitive optoelectronic whole field technique used for measuring surface displacement strain analysis, surface roughness, surface contour etc. This nondestructive evaluation technique permits measurement of deformations in the micrometer and sub micrometer ranges produced in a test specimen under different loading conditions. In ESPI...
متن کاملIndustrial Applications of Speckle Techniques - Measurement of Deformation and Shape
Modern industry needs quick and reliable measurement methods for measuring deformation, position, shape, roughness, etc. This thesis is mainly concerned with industrial applications of speckle metrology. Speckle metrology is an optical non-contact whole field technique that provides the means to measure; deformation and displacement, object shape, surface roughness, vibration, and dynamic event...
متن کامل