Experimental Study on Slicing of Sapphire with Fixed Abrasive Diamond Wire Saw
نویسندگان
چکیده
Experimental study on slicing of sapphire with fixed abrasive diamond wire saw was conducted in this paper. The process parameters were optimized through orthogonal experiment of three factors and four levels. The effects of wire speed, feed speed and tension pressure on the surface roughness were analyzed. Surface roughness in cutting direction and feed direction were both detected. The results show that feed speed plays the most significant role on the surface roughness of sliced sapphire followed by wire speed and tension pressure. The optimized process parameters are as follows: wire speed 1.9 m/s, feed speed 0.187 mm/min and tension pressure 0.18 MPa. In the end, the results were verified by analysis of variance. Keywords—Fixed abrasive, diamond wire saw, slicing, sapphire, orthogonal experiment.
منابع مشابه
Fixed abrasive diamond wire machining—part I: process monitoring and wire tension force
The process monitoring and mechanics of fixed abrasive diamond wire saw machining are investigated in this study. New techniques to affix diamond particles to a steel wire core have advanced to make this process feasible for the machining of ceramics, wood, and foam materials. Developments in fixed abrasive diamond wire machining are first reviewed. Advantages of using fixed abrasive diamond wi...
متن کاملWafer Slicing and Wire Saw Manufacturing Technology
Wire saw, with its ability to cut very thin wafers from large diameter crystalline ingots of semiconductor materials, has emerged as a leading technology for wafer production in semiconductor and photovoltaic industry. Nevertheless, the wire saw cutting process remains lacking a theoretical methodology and is not properly understood. The modern times compulsion of more accurate and efficient ma...
متن کاملApplication of harmony search algorithm to evaluate performance of diamond wire saw
Evaluation and prediction of performance of diamond wire saw is one of the most important factors involved in planning the dimension stone quarries. The wear rate of diamond wire saw can be investigated as a major criterion to evaluate its performance. The wear rate of diamond wire saw depends upon non-controlled parameters related to rock characteristics and controlled parameters related to ch...
متن کاملPrototype of Cutting Machine by Wire-sawing in Vacuum for In-situ Investigation of Rocks
Introduction: A bullet type sampler is sometimes used to obtain a sample from an asteroid on samplereturn missions [1]. On the other hand, in-situ analysis is demanded for the investigation of more amount of rock samples. Many drilling or coring devices have been developed [2-5]. Slicing the rock sample is preferable to observe its interior rather than shaving [6]. Because coolant cannot use in...
متن کاملAn Investigation on Two Types of Crystalline Micro-diamond Film Coated Tools Lapping with Sapphire Wafer
Two types of micron-diamond films were prepared on YG6 substrate by hot filament chemical vapor deposition(HFCVD) method. Morphology and orientation of crystalline growth were evaluated by SEM and XRD. Diamond film coated tools and sapphire wafer’ surface before and after lapping experiment were contrasted. The results indicated that a significant change in Raman spectrum of two types of micro...
متن کامل