Magnesium Fluoride Electron-Selective Contacts for Crystalline Silicon Solar Cells.
نویسندگان
چکیده
In this study, we present a novel application of thin magnesium fluoride films to form electron-selective contacts to n-type crystalline silicon (c-Si). This allows the demonstration of a 20.1%-efficient c-Si solar cell. The electron-selective contact is composed of deposited layers of amorphous silicon (∼6.5 nm), magnesium fluoride (∼1 nm), and aluminum (∼300 nm). X-ray photoelectron spectroscopy reveals a work function of 3.5 eV at the MgF2/Al interface, significantly lower than that of aluminum itself (∼4.2 eV), enabling an Ohmic contact between the aluminum electrode and n-type c-Si. The optimized contact structure exhibits a contact resistivity of ∼76 mΩ·cm(2), sufficiently low for a full-area contact to solar cells, together with a very low contact recombination current density of ∼10 fA/cm(2). We demonstrate that electrodes functionalized with thin magnesium fluoride films significantly improve the performance of silicon solar cells. The novel contacts can potentially be implemented also in organic optoelectronic devices, including photovoltaics, thin film transistors, or light emitting diodes.
منابع مشابه
Effect of Silicon Nanowire on Crystalline Silicon Solar Cell Characteristics
Nanowires (NWs) are recently used in several sensor or actuator devices to improve their ordered characteristics. Silicon nanowire (Si NW) is one of the most attractive one-dimensional nanostructures semiconductors because of its unique electrical and optical properties. In this paper, silicon nanowire (Si NW), is synthesized and characterized for application in photovoltaic device. Si NWs are ...
متن کاملAmorphous silicon passivated contacts for diffused junction silicon solar cells
Articles you may be interested in Compositional study of defects in microcrystalline silicon solar cells using spectral decomposition in the scanning transmission electron microscope Appl. Influence of back contact roughness on light trapping and plasmonic losses of randomly textured amorphous silicon thin film solar cells Appl. Photocurrent increase in n-i-p thin film silicon solar cells by gu...
متن کاملConductive and Stable Magnesium Oxide Electron-Selective Contacts for Efficient Silicon Solar Cells
DOI: 10.1002/aenm.201601863 level of recombination suppression at the rear surface. When Al is directly deposited on n-type c-Si, however, and even if it is not alloyed with the silicon, the contact behaves in a rectifying fashion and is associated with a high contact resistance, despite the small difference (≈0.1–0.2 eV) that exists between the Al work function and the electron affinity of sil...
متن کاملDopant‐Free and Carrier‐Selective Heterocontacts for Silicon Solar Cells: Recent Advances and Perspectives
By combining the most successful heterojunctions (HJ) with interdigitated back contacts, crystalline silicon (c-Si) solar cells (SCs) have recently demonstrated a record efficiency of 26.6%. However, such SCs still introduce optical/electrical losses and technological issues due to parasitic absorption/Auger recombination inherent to the doped films and the complex process of integrating discre...
متن کاملIncorporation of a self-aligned selective emitter to realize highly efficient (12.8%) Si nanowire solar cells.
Formation of a selective emitter in crystalline silicon solar cells improves photovoltaic conversion efficiency by decoupling emitter regions for light absorption (moderately doped) and metallization (degenerately doped). However, use of a selective emitter in silicon nanowire (Si NW) solar cells is technologically challenging because of difficulties in forming robust Ohmic contacts that interf...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
- ACS applied materials & interfaces
دوره 8 23 شماره
صفحات -
تاریخ انتشار 2016