The Effect of Spectrophotometer Geometry on the Measured Colors for Textile Samples with Different Textures
نویسنده
چکیده
Spectrophotometers are usually built based on one of these two kinds of geometry; d/8 (diffuse/8) and 45/0. Considering that measured or observed colors depend on the illuminating and viewing conditions, the 45/0 spectrophotometer geometry or d/8 geometry affects the results. In addition, the sample characteristics such as gloss or texture can also influence the measuring results. Therefore, the effect of geometry will be affected by the characteristics of the sample. In this paper, the effect of spectrophotometer geometry on the result of color measurement is investigated for textile samples with different types of texture. In addition, the effect of texture on the measured colors was compared for two geometries. To this end, 63 polyester samples contained of 9 color centers each of them has 7 different types of texture were used. The spectral reflectance data of the fabrics were measured using two spectrophotometers with different geometry; d/8 and 45/0. Other parameters of the two measuring systems such as the aperture size, laboratory conditions, the sample’s direction in front of the spectrophotometer and the number of specimen’s layers were equal. The measured values of two instruments were compared. It was shown that the spectrophotometer geometry influences the color coordinates of the samples. The d/8 spectrophotometer with include mode usually gives larger lightness values. C and H values are affected by the type of spectrophotometer and this effect is dependent on the color center of the sample. In another part of the present study, the color change via the texture difference was evaluated for each of the two geometries, and the obtained results were compared with each other. It was found that the surface texture of the sample influences the measured color from 0.4 to about 4.8 CIEDE2000 (1:1:1) unit for both two types of the spectrophotometer. Moreover, as same as d/8 geometry, the color change via the texture which is measured by 45/0 shows no acceptable correlation with visual assessments.
منابع مشابه
Isolation and Investigation of the Effect of Soil and Textile Wastewater Bacteria on Decolorization of Industrial Dyes
Introduction: Azo dyes are the most commonly used colors in textile industry. These colors are among the pollutant materials in the environment. Moreover, they are discharged into the environment in combination with industrial wastewater and pollute the ecosystem. The purpose of this study was to isolate and detect bacteria biodegrading Methyl Red and Rubin Dyprsy colors from dye waste water. ...
متن کاملInstrument dependency of Kubelka-Munk theory in computer color matching
Different industries are usually faced with computer color matching as an important problem. The most famous formula which is commonly used for recipe prediction is based on Kubelka-Munk K-M theory. Considering that spectrophotometer’s geometry and its situation influence the measured spectral values, the performance of this method can be affected by the instrument. In the present study, three ...
متن کاملThe effect of Inorganic Nanoparticles on Camouflage Properties of Cotton/Polyester Fabrics
Drawing upon reflectance behavior of woodland colors involving dark brown in the UV-Vis-IR bands, two colored pigments were used to print cotton/polyester Co/PET goods. Inorganic nanoparticles of TiO2, ZnO and AL2O3 were also loaded onto the printing formulation. The reflectance profile of treated samples was studied using Jasco V-670 reflectance spectrophotometer. SEM analysis of printed fabri...
متن کاملTreatment of Synthetic Textile Wastewater by Combination of Coagulation/Flocculation Process and Electron Beam Irradiation
Introduction: Textile wastewaters from dyeing and finishing processes are heavily polluted with dyes, textile auxiliaries and chemicals and have a broad range of pH, high COD concentration and suspended particles. In this study, the efficiency of color and turbidity removal from synthetic textile wastewater samples were investigated by combined process of coagulation/ flocculation and electron ...
متن کاملGum Tragacanth Fibers Introducing Primitive GT Fibers (RESEARCH NOTE)
In this research, a method for producing gum tragacanth (GT) fibers is presented. Ribbon type GT of Astragalus Gummifer species were obtained from local production lands. The gum was treated with alkali to increase its process ability, and allowed to stand for a period of time to reach the proper viscosity and/or to "ripen". Samples with different ripening times were prepared and their viscosit...
متن کامل