Three-dimensional Composite Lattice Structures Fabricated by Electrical Discharge Machining
نویسندگان
چکیده
We present a novel method for fabricating carbon fiber composite sandwich panels with lattice core construction by means of electrical discharge machining (EDM). First, flattop corrugated carbon fiber composite cores were fabricated by a hot press molding method. Then, two composite face sheets were bonded to each corrugated core to create precursor sandwich panels. These panels were transformed into sandwich panels with near-pyramidal truss cores by EDM plungecutting the corrugated core between the face sheets with a shaped cuprite electrode. The flat top corrugation permits adhesive to be applied consistently, and the selected dimensions leave a substantial bond area after cutting, resulting in a strong core-to-sheet bond. The crushing behavior of this novel construction was investigated in flatwise compression, and the results were compared to analytical expressions for strength and stiffness.
منابع مشابه
An Experimental Investigation on Designed and Fabricated WECSM Setup during Micro Slicing of e-glass Fibre Epoxy Composite
The e-glass fibre epoxy composite is a nonconductive ceramic material hence it is difficult to machine by any well known non-conventional machining methods like electrical discharge machining, wire electrical discharge machining etc. This material can be machined with conventional machining but compromise with accuracy, surface texture even not possible to micro slicing etc. Keeping in view, a ...
متن کاملThe Effect of External Skin on Buckling Strength of Composite Lattice Cylinders Based on Numerical and Experimental Analysis
Currently, lattice composite structures have many applications in aerospace industries. The present research analyzed the effect of an external skin consisting of a lattice’s cylindrical shell on the buckling strength of composite materials, both numerically and experimentally. Two classes of specimens, with and without external skins, were fabricated using the filament winding process. To find...
متن کاملExperimental investigations on machining characteristics of Al 6061 hybrid metal matrix composites processed by electrical discharge machining
Metal matrix composites, in particular, Aluminium Matrix Composites are gaining increasing attention for applications in aerospace, defence and automobile industries. The use of nonconventional machining techniques in shaping aluminum metal matrix composites has generated considerable interest as the manufacturing of complicated contours such as dies. Electrical discharge machining (EDM) appear...
متن کاملAdvancement in Electric Discharge Machining on metal matrix composite materials in recent: A Review
Existing manufacturing industries are fronting challenges from these advanced nasent materials viz. nano material ,ceramics, super alloys, and metal matrix composites, that are hard and difficult to machine, requiring high accuracy, surface quality excellence which affects and increases machining cost. To meet these tasks, unconventional machining processes are being used to achieve optimum met...
متن کاملCurrent research trends in variants of Electrical Discharge Machining: A review
Present manufacturing industries are facing challenges from these advanced materials viz. super alloys, ceramics, and composites, that are hard and difficult to machine, requiring high precision, surface quality which increases machining cost. To meet these challenges, non-conventional machining processes are being employed to achieve higher metal removal rate, better surface finish and greater...
متن کامل