Design of a 900 / 1800 Mhz Dual - Band Ltcc Chip Antenna for Mobile
نویسندگان
چکیده
AND HUEY-RU CHUANG National Cheng Kung University Tainan, Taiwan, ROC Recently, multi-layer LTCC technology has been used extensively for the miniaturization of RF passive components and antennas. In addition to the high integration by embedding components and interconnects, high Q passive elements have been demonstrated with LTCC technology.1 It is suitable to integrate antennas and other passive components, even with active devices. Higher integration and more compact structures make LTCC technology popular in RF applications. A chip antenna using LTCC technology for 2.45 GHz applications has been reported.2 DESIGN OF A 900/1800 MHZ DUAL-BAND LTCC CHIP ANTENNA FOR MOBILE COMMUNICATIONS APPLICATIONS
منابع مشابه
شبیه سازی تشعشع گوشی تلفن همراه دو باندی درمجاورت مدل آناتومیک سر انسان و محاسبه توزیع SAR متوسط یک گرم
Introduction: In recent years, the rapidly increasing use of mobile phone operating nearby the human head has caused public concern for its effects on human health. The FDTD methodology is widely used for calculation of the effects of electromagnetic fields on human body. Methods and Materials: In this paper, first a dual band patch antenna structure (GSM-900 and DCS 1800), which is located i...
متن کاملFinal Research Report
The subject of this project is to develop a triple band small size microstrip antennas for operation in modern multi-band mobile transceiver systems. Various techniques for analysis and design of such antennas are investigated in this project. First, a triple band antenna design based on dual band design is explored. The analysis is based on the lumped element equivalence extracted from transmi...
متن کاملDesign, Simulation and implementation of active dual-band dipole antenna using a series stub
In this paper, a new method for designing an active dual-band dipole antenna is proposed. The operating frequencies of the proposed antenna are 150 and 450 MHz that are usually used in military applications. Using a series stub is the main idea in the proposed dual-band antenna, where it makes an independent resonance frequency higher than the main resonance frequency of a conventional dipole. ...
متن کاملDesign Of A Dual Band GSM Micro-Strip Patch Antenna
New design of obtaining a dual frequency bands antenna operate on the dual frequency bands of the Global System for Mobile Communications (GSM) (Lower band = 900 MHz, Upper band = 1.9 GHz) with a single-feed square micro-strip antenna are proposed and experimentally studied. The proposed designs are based on the same patch dimensions configured with one rectangular slot in the form of cut insid...
متن کاملSystematic Design of High-Performance Smart Card with HF/UHF Dual-Band RFID Tag
Recently, there have been widely conducted researches on dual-band radio frequency identification (RFID) tag based on 13.56 MHz (HF) and 900 MHz (UHF). Most dual-band RFID tag has been implemented so that each antenna is separated in a different inlay sheet respectively, which makes the resulting smart card impractically thick, and the typical drawback of dual-band RFID tags incorporated in one...
متن کامل