Effect of temperature on wet agglomeration of crystals
نویسندگان
چکیده
OBJECTIVES This study dealt with the wet agglomeration process in which a small quantity of binder liquid was added into a suspension of crystals, directly in the stirring vessel where the crystallization took place. The purpose of this investigation was evaluation of the effect of temperature on the agglomeration process in order to gain insight into the mechanism of the formation of the agglomerates. MATERIALS AND METHODS Carbamazepine was used as a model drug and water/ethanol and isopropyl acetate were used as crystallization system and binder liquid, respectively. The agglomeration of crystals was carried out at various temperatures and the agglomerates were characterized in terms of size, morphology, density and mechanical strength. RESULTS Evaluation of the agglomerates along the course of agglomeration shows that the properties of the particles change gradually but substantially. Higher temperature of the system during agglomeration process favors the formation of more regular agglomerates with mechanically stronger and denser structure; this can be explained by the promotion effect of temperature on the agglomeration process. CONCLUSION With optimized wet agglomeration temperature, spherical, dense, and strong agglomerates can be obtained.
منابع مشابه
Effect of temperature on wet agglomeration of crystals
Objective(s):This study dealt with the wet agglomeration process in which a small quantity of binder liquid was added into a suspension of crystals, directly in the stirring vessel where the crystallization took place. The purpose of this investigation was evaluation of the effect of temperature on the agglomeration process in order to gain insight into the mechanism of the formation of the agg...
متن کاملA Numerical Study on Agglomeration in High Temperature Fluidized beds
Soft-sphere discrete element method (DEM) and Navier-Stokes equations were coupled with equations of energy for gas and solids to investigate the process of agglomeration in fluidized bed of polyethylene particles at high temperature. The Newton’s second law of motion was adapted for translational and rotational motion of particles and agglomerates. The cohesive force for polyethylene particles...
متن کاملEffect of Dopant on Improving Structural, Density and Functional Properties of Ceria Based SOFC Electrolyte
In the present work, Gadolinium Doped ceria (GDC) based solid electrolyte was successfully synthesized through wet chemical method to operate at intermediate temperature (500–700°C) for SOFCs. DSC study revealed the formation of GDC phase at 900°C during calcination. The crystal structure of GDC was identified as cubic fluorite phase and the crystallite size was found to be around 23 nm....
متن کاملX-ray Diffraction and SEM Studies on the Effect of Temperature on the Formation of Main Phase Sr2MgSi2O7 Using a Wet and Dry Method for its Preparation
A pure Silicate host namely Sr2MgSi2O7 as a support for a long-lasting afterglow when dopped with rare-earth elements was sought after. To this end the process of obtaining firing temperatures of the above mentioned phase in normal condition was carried out using suggested wet and dry methods. The degree of purity obtained in these preparatory methods as wel...
متن کاملPreventing Crystal Agglomeration of Pharmaceutical Crystals Using Temperature Cycling and a Novel Membrane Crystallization Procedure for Seed Crystal Generation
In this work, a novel membrane crystallization system was used to crystallize micro-sized seeds of piroxicam monohydrate by reverse antisolvent addition. Membrane crystallization seeds were compared with seeds produced by conventional antisolvent addition and polymorphic transformation of a fine powdered sample of piroxicam form I in water. The membrane crystallization process allowed for a con...
متن کامل