Photoinduced charge carrier generation in a poly(3-hexylthiophene) and methanofullerene bulk heterojunction investigated by time-resolved terahertz spectroscopy.

نویسندگان

  • Xin Ai
  • Matthew C Beard
  • Kelly P Knutsen
  • Sean E Shaheen
  • Garry Rumbles
  • Randy J Ellingson
چکیده

We report on the ultrafast photoinduced charge separation processes in varying compositions of poly(3-hexylthiophene) (P3HT) blended with the electron acceptor [6,6]-phenyl-C61-butyric acid methyl ester (PCBM). Through the use of time-resolved terahertz spectroscopy, the time- and frequency-dependent complex photoconductivity is measured for samples with PCBM weight fractions (WPCBM) of 0, 0.2, 0.5, and 0.8. By analysis of the frequency-dependent complex conductivity, both the charge carrier yield and the average charge carrier mobility have been determined analytically and indicate a short (<0.2 nm) carrier mean free path and a suppressed long-range transport that is characteristic of carrier localization. Studies on pure films of P3HT demonstrate that charge carrier generation is an intrinsic feature of the polymer that occurs on the time scale of the excitation light, and this is attributed to the dissociation of bound polaron pairs that reside on adjacent polymer chains due to interchain charge transfer. Both interchain and interfacial charge transfer contribute to the measured photoconductivity from the blended samples; interfacial charge transfer increases as a function of increasing PCBM. The addition of PCBM to the polymer films surprisingly does not dramatically increase the production of charge carriers within the first 2 ps. However, charge carriers in the 0.2 and 0.5 blended films survive to much longer times than those in the P3HT and 0.8 films.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Spectroscopic analysis of NIR-dye sensitization in bulk heterojunction polymer solar cells.

The photovoltaic conversion efficiency for near-infrared (NIR) sunlight is improved successfully by dye sensitization of bulk heterojunction polymer solar cells, in which the active layer was prepared by a ternary blend of poly(3-hexylthiophene), a fullerene derivative (1-(3-methoxycarbonyl)propyl-1-phenyl-[6,6]-methanofullerene), and an NIR dye, silicon phthalocyanine bis(trihexylsilyl oxide)....

متن کامل

Direct observation of sub-100 fs mobile charge generation in a polymer-fullerene film.

The formation of mobile charges in a roll-to-roll processed poly-3-hexylthiophene-fullerene bulk heterojunction film is observed directly by using transient terahertz spectroscopy with sub-100 fs temporal resolution. The transient terahertz ac conductivity reveals that 20% of the incident pump photons are converted into highly delocalized charges within the 40 fs, 3.1 eV pump pulse duration, wh...

متن کامل

Bimolecular recombination coefficient as a sensitive testing parameter for low-mobility solar-cell materials.

Bimolecular charge carrier recombination has been clarified in bulk-heterojunction solar cells based on a blend of regioregular poly(3-hexylthiophene) and 1-(3-methoxycarbonyl)propyl-1-phenyl-[6,6]-methanofullerene using the time-of-flight method. We show how bimolecular recombination influences the charge carrier transport, how it limits the efficiency of low-mobility solar cells, and how to e...

متن کامل

Ultrafast Relaxation of the Poly(3-hexylthiophene) Emission Spectrum

The optoelectronic properties of conjugated polymers combined with “plastic” mechanical behavior and solution processability make them highly interesting materials with applications in organic electronics. 5 In bulk heterojunction (BHJ) solar cells, an electron-donating conjugated polymer is blended with a fullerene electron acceptor, such as [6,6]-phenyl C60 butyric acid methyl ester (PCBM). 1...

متن کامل

Energy-Level Alignment at Metal-Organic and Organic-Organic Interfaces in Bulk-Heterojunction Solar Cells

Ultra violet photoelectron spectroscopy measurements in combination with the Integer Charge Transfer model is used to obtain the energy level alignment diagrams for two common types of bulk heterojunction solar cell devices based on poly(3-hexylthiophene) or poly(2-methoxy-5-(3’,7’-dimethyloctyloxy)-1,4-phenylene vinylene) as the donor polymer and (6,6)phenyl-C61-butric-acid as the acceptor mol...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • The journal of physical chemistry. B

دوره 110 50  شماره 

صفحات  -

تاریخ انتشار 2006