Acoustoelastic Lamb wave propagation in biaxially stressed plates.
نویسندگان
چکیده
Acoustoelasticity, or the change in elastic wave speeds with stress, is a well-studied phenomenon for bulk waves. The effect of stress on Lamb waves is not as well understood, although it is clear that anisotropic stresses will produce anisotropy in the Lamb wave dispersion curves. Here the theory of acoustoelastic Lamb wave propagation is developed for isotropic media subjected to a biaxial, homogeneous stress field. It is shown that, as expected, dispersion curves change anisotropically for most stresses, modes, and frequencies. Interestingly, for some mode-frequency combinations, changes in phase velocity are isotropic even for a biaxial stress field. Theoretical predictions are compared to experimental results for several Lamb wave modes and frequencies for uniaxial loads applied to an aluminum plate, and the agreement is reasonably good.
منابع مشابه
Higher order acoustoelastic Lamb wave propagation in stressed plates.
Modeling and experiments are used to investigate Lamb wave propagation in the direction perpendicular to an applied stress. Sensitivity, in terms of changes in velocity, for both symmetrical and anti-symmetrical modes was determined. Codes were developed based on analytical expressions for waves in loaded plates and they were used to give wave dispersion curves. The experimental system used a p...
متن کاملAcoustoelastic Effect in Stressed Anisotropic Plates
This paper presents a forward calculation and analytic results of plate wave propagation in stressed plates of cubic materials. The single crystalline Ge films deposited on the Z-cut silicon wafers are investigated. Significant biaxial residual stresses in the film results from the lattice misfit between of the Ge film and the Si substrate. Phase velocity change of the acoustic waves due to mec...
متن کاملIn situ estimation of applied biaxial loads with Lamb waves.
Spatially distributed arrays of piezoelectric disks are being applied to monitor structural integrity using Lamb waves. Applied loads directly affect waves propagating between array elements because of dimensional changes and the acoustoelastic effect. Resulting changes in phase velocity depend upon the propagation direction as well as the Lamb wave mode and frequency. This paper shows from num...
متن کاملThe Acoustoelastic Effect: EMAT Excitation and Reception of Lamb Waves in Pre-Stressed Metal Sheets
The acoustoelastic effect relates the change in the speed of an acoustic wave travelling in a solid, to the pre-stress of the propagation medium. In this work the possibility of assessing nondestructively the stress status in metal sheets, by using the acoustoelastic effect, is investigated. As the effect turns out to be very small for practical values of applied stress, the proposed technique ...
متن کاملNon-Contact Stress Measurement during Tensile Testing Using an Emat for SH0-Plate Wave and Lamb Wave
The stress on a test specimen during tensile testing is generally measured by a strain gauge. This method has some problems in that it would influence the measurement conditions of the tensile test and can evaluate only the position at which the strain gauge is attached. The acoustoelastic method is proposed as a method replacing the strain gauge method. However, an ultrasonic sensor with a pie...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- The Journal of the Acoustical Society of America
دوره 132 3 شماره
صفحات -
تاریخ انتشار 2012