Hollow multilayer photonic bandgap fibers for NIR applications.
نویسندگان
چکیده
Here we report the fabrication of hollow-core cylindrical photonic bandgap fibers with fundamental photonic bandgaps at near-infrared wavelengths, from 0.85 to 2.28 microm. In these fibers the photonic bandgaps are created by an all-solid multilayer composite meso-structure having a photonic crystal lattice period as small as 260 nm, individual layers below 75 nm and as many as 35 periods. These represent, to the best of our knowledge, the smallest period lengths and highest period counts reported to date for hollow PBG fibers. The fibers are drawn from a multilayer preform into extended lengths of fiber. Light is guided in the fibers through a large hollow core that is lined with an interior omnidirectional dielectric mirror. We extend the range of materials that can be used in these fibers to include poly(ether imide) (PEI) in addition to the arsenic triselenide (As(2)Se(3)) glass and poly(ether sulfone) (PES) that have been used previously. Further, we characterize the refractive indices of these materials over a broad wavelength range (0.25 - 15 microm) and incorporated the measured optical properties into calculations of the fiber photonic band structure and a preliminary loss analysis.
منابع مشابه
Dynamic control of higher-order modes in hollow-core photonic crystal fibers.
We present a versatile method for selective mode coupling into higher-order modes of photonic crystal fibers, using holograms electronically generated by a spatial light modulator. The method enables non-mechanical and completely repeatable changes in the coupling conditions. We have excited higher order modes up to LP(31) in hollow-core photonic crystal fibers. The reproducibility of the coupl...
متن کاملA 158 fs 5.3 nJ fiber-laser system at 1 microm using photonic bandgap fibers for dispersion control and pulse compression.
We demonstrate a 158 fs 5.3 nJ mode-locked laser system based on a fiber oscillator, fiber amplifier and fiber compressor. Dispersion compensation in the fiber oscillator was obtained with a solid-core photonic bandgap (SC-PBG) fiber spliced to standard fibers, and external compression is obtained with a hollow-core photonic bandgap (HC-PBG) fiber.
متن کاملNovel Sensor and Telecommunication Applications of Photonic Crystal Fibers
Photonic crystal fibers are novel optical waveguides containing a periodic array of air holes running along the fiber around a solid or hollow core. These fibers have recently attracted great interest in many research areas such as in nonlinear optics and measurement science as their manufacturing process allows for a high flexibility in the fiber design. Index-guiding photonic crystal fibers a...
متن کاملTransmission properties of hollow-core photonic bandgap fibers in relation to molecular spectroscopy.
The transmission properties of five types of hollow-core photonic bandgap fibers (HC-PBFs) are characterized in the telecom wavelength range around 1.5 microm. The variations in optical transmission are measured as a function of laser frequency over a 2 GHz scan range as well as a function of time over several hours. The influence of these variations on spectroscopy of molecules in a HC-PBF is ...
متن کاملGas Sensor Based on Large Hollow-Core Photonic Bandgap Fiber
One concern in using photonic band-gap fiber (PBGF) as a gas sensor is the response time. In this type of the gas sensors, response time is the time required for gas to diffuse into the hollow-core. So considering a large hollow-core PBGF (HC-PBGF), the response time can be significantly reduced. But in the large HC-PBGF, the fundamental issue is the presence of higher order modes (HOMs). Somet...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Optics express
دوره 12 8 شماره
صفحات -
تاریخ انتشار 2004