On Approach to Optimize Manufacturing of a Transistors with Two Sources to Decrease Their Dimensions
نویسنده
چکیده
In this paper we introduce an approach to optimize technological process of manufacturing of heterotransistors with two sources to decrease their dimensions. Framework the approach we consider a heterostructure with specific configuration. After manufacturing of the heterostructure we consider doping of several areas of the heterostructure by diffusion or ion implantation. The doping was finished by optimized annealing of dopant and/or radiation defects. We introduce an analytical approach for prognosis of mass transport to obtain the required results.
منابع مشابه
Modeling of Manufacturing of Field-Effect Heterotransistors without P-n-junctions to Optimize Decreasing their Dimensions
It has been recently shown that manufacturing p-n-junctions, field-effect and bipolar transistors, thyristors in a multilayer structure by diffusion or ion implantation with the optimization of dopant and/or radiation defects leads to increase the sharpness of p-n-junctions (both single p-n-junctions and p-n-junctions framework their system). Due to the optimization, one can also obtain increas...
متن کاملSymmetrical, Low-Power, and High-Speed 1-Bit Full Adder Cells Using 32nm Carbon Nanotube Field-effect Transistors Technology (TECHNICAL NOTE)
Carbon nanotube field-effect transistors (CNFETs) are a promising candidate to replace conventional metal oxide field-effect transistors (MOSFETs) in the time to come. They have considerable characteristics such as low power consumption and high switching speed. Full adder cell is the main part of the most digital systems as it is building block of subtracter, multiplier, compressor, and other ...
متن کاملBallistic (n,0) Carbon Nanotube Field Effect Transistors' I-V Characteristics: A Comparison of n=3a+1 and n=3a+2
Due to emergence of serious obstacles by scaling of the transistors dimensions, it has been obviously proved that silicon technology should be replaced by a new one having a high ability to overcome the barriers of scaling to nanometer regime. Among various candidates, carbon nanotube (CNT) field effect transistors are introduced as the most promising devices for substituting the silicon-based ...
متن کاملA Study of the Linear Electromagnetic Generator for Harvesting Electrical Energy from Initial Acceleration: Design, Optimization, and Experimental Validation
One of the important requirements in projectiles is to design a power supply for fuse consumption. In this study, an optimum design for the power supply, which includes a Miniaturized Inertia Generator (MIG), was introduced. The main objective of this research was to optimize the dimensions of the MIG with the aim of increasing energy. To achieve this, the design of experiment (DOE) was carried...
متن کاملModeling of Manufacturing of a Field-effect Transistor to Determine Conditions to Decrease Length of Channel
In this paper we introduce an approach to model technological process of manufacture of a field-effect heterotransistor. The modeling gives us possibility to optimize the technological process to decrease length of channel by using mechanical stress. As accompanying results of the decreasing one can find decreasing of thickness of the heterotransistors and increasing of their density, which wer...
متن کامل