Simulation of a Crash Prevention Technology at a No-passing Zone Site
نویسندگان
چکیده
No-passing zone crashes constitute a sizable percentage of the total crashes on two-lane rural roads. A detection and warning system has been devised and implemented at a no-passing zone site on route 114 of Southwest Virginia to address this problem. The warning system aims at deterring drivers from illegally conducting a passing maneuver within the no-passing zone area. The violating driver is warned in real time to stop the illegal act. This system is currently operational and its main function is to warn the no-passing zone violator. The aim of this research is to extend the warning system to the opposing vehicle in the same lane of the persistent violator in order to avoid crashes caused by the illegal maneuver that is taking place at a crest vertical curve of the two-lane rural road. In order to test the new system prior to its physical installation, a computer simulation has been developed to represent the real world violation conditions so that a better understanding of the problem and its varying scenarios would be achieved. The new simulation, which is the focus of this thesis, takes advantage of an existing simulation developed earlier to replicate only the illegal maneuver without giving any warnings to the opposing vehicle. The new program simulates the outcome of deploying a warning sign to the opposing driver for crash avoidance purposes assuming that all violators persist to pass the vehicle ahead. More than 712,000 computer runs were conducted to simulate the various possible outcomes including the sensitivity analysis. A critical comparison was made between the previous system that warned only the violating vehicle and the current program that warns both the violator as well as the opposing vehicle. The results indicate that warning the opposing driver would reduce the rate of unavoidable crashes by approximately 11% in the east direction and 13.25% in the
منابع مشابه
Estimating the Safety Benefits of Red Light Cameras at Signalized Intersections in Urban Areas Case Study: The City of Virginia Beach
The Highway Safety Manual [HSM, 2010] recommends safety evaluations be performed before implementing any roadway treatment to predict the expected safety consequences. Safety consequences can be measured using crash prediction models, Crash Modification Factor (CMFs), or both. This paper develops a CMF to show the expected impact of red-light cameras (RLCs) on safety at signalized intersections...
متن کاملImpact of Optimally Minimizing Delay Times on Safety at Signalized Intersections in Urban Areas, Case Study: The City of Virginia Beach
Optimally minimizing delay times at signalized intersections can significantly improve both traffic flow and safety. However, most traffic flow optimizing tools do not measure the effect on safety. This study uses nonlinear programming (NLP) algorithms to optimally minimize delay times and employs both Safety performance functions (SPFs) and empirical Bayes (EB) before-after methodology to meas...
متن کاملAn Investigation on Crash Worthiness of Different Vehicle Brands: A Case Study of Rollover Crashes
This study aimed at indexing crash worthiness capability of 20 most frequently used car brands in Iran. Since rollover crashes are one of the most important crash types due to their high impact on crash severity, they were chosen as the case study of the current research. In this regard, the data of 42,118 rollover crashes of urban and rural roads of Iran which occurred from 2009 to 2012 was us...
متن کاملFive-Zone Simulating Moving Bed for Ternary Separation
Five-zone Simulating Moving Bed (SMB) system, designed for ternary separation, is a modified form of standard four-zone SMB which is only effective in binary separation. It was reported in literature that the five-zone SMB separates the extract-II stream with a lower purity value than that of raffinate and extract-I streams. To address this issue, five zone SMB was designed, using safety ma...
متن کاملWork zone safety analysis and modeling: a state-of-the-art review.
OBJECTIVE Work zone safety is one of the top priorities for transportation agencies. In recent years, a considerable volume of research has sought to determine work zone crash characteristics and causal factors. Unlike other non-work zone-related safety studies (on both crash frequency and severity), there has not yet been a comprehensive review and assessment of methodological approaches for w...
متن کامل