Non-Destructive Testing of Carbon Fiber Reinforced Plastic by Infrared Thermography Methods
نویسنده
چکیده
Composite materials are one answer to the growing demand for materials with better parameters of construction and exploitation. Composite materials also permit conscious shaping of desirable properties to increase the extent of reach in the case of metals, ceramics or polymers. In recent years, composite materials have been used widely in aerospace, energy, transportation, medicine, etc. Fiber-reinforced composites including carbon fiber, glass fiber and aramid fiber have become a major structural material. The typical defect during manufacture and operation is delamination damage of layered composites. When delamination damage of the composites spreads, it may lead to a composite fracture. One of the many methods used in non-destructive testing of composites is active infrared thermography. In active thermography, it is necessary to deliver energy to the examined sample in order to obtain significant temperature differences indicating the presence of subsurface anomalies. To detect possible defects in composite materials, different methods of thermal stimulation can be applied to the tested material, these include heating lamps, lasers, eddy currents, microwaves or ultrasounds. The use of a suitable source of thermal stimulation on the test material can have a decisive influence on the detection or failure to detect defects. Samples of multilayer structure carbon composites were prepared with deliberately introduced defects for comparative purposes. Very thin defects of different sizes and shapes made of Teflon or copper having a thickness of 0.1 mm were screened. Non-destructive testing was carried out using the following sources of thermal stimulation, heating lamp, flash lamp, ultrasound and eddy currents. The results are reported in the paper. Keywords—Non-destructive testing, IR thermography, composite material, thermal stimulation.
منابع مشابه
NDT characterisation of carbon-fibre and glass-fibre composites using non-invasive imaging techniques
The prerequisite for more competent and cost effective transport has led to the evolution of innovative testing and evaluation procedures. Non-destructive testing and evaluation (NDT & E) techniques for assessing the integrity of composite structures are essential to both reduce manufacturing costs and out of service time of transport means due to maintenance. Smart methods for assessing the in...
متن کاملLock-in Thermography Image Procesing
Composite materials have appropriate thermal properties for detection flaws by means of non-destructive infrared thermography methods. Infrared thermography methods are based on tracking heat flow that has been induced by flood lamps. Lock-in thermography, as one of infrared thermography methods, is used in detection of flaws. Surface of specimen is periodically heated by heat flow in form of s...
متن کاملFlash Thermography to Evaluate Porosity in Carbon Fiber Reinforced Polymer (CFRPs)
It is a fact that the presence of porosity in composites has detrimental effects on their mechanical properties. Then, due to the high probability of void formation during manufacturing processes, it is necessary to have the availability of non-destructive evaluation techniques, which may be able to discover the presence and the distribution of porosity in the final parts. In recent years, flas...
متن کاملQuadratic Frequency Modulated Thermal Wave Imaging for Non-destructive Testing
Thermal non-destructive testing and evaluation of glass fibre reinforced plastic materials has gained more importance in aerospace industry due to low weight and high strength capabilities in severe environmental conditions. More recently, pulse compression favorable non-stationary excitation schemes have been exhibiting reliable defect detection capabilities in infrared non-destructive testing...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2016