Comparison of laser and intense pulsed light sintering (IPL) for inkjet-printed copper nanoparticle layers
نویسندگان
چکیده
In this contribution we discuss the sintering of an inkjet-printed copper nanoparticle ink based on electrical performance and microstructure analysis. Laser and intense pulsed light (IPL) sintering are employed in order to compare the different techniques and their feasibility for electronics manufacturing. A conductivity of more than 20% of that of bulk copper material has been obtained with both sintering methods. Laser and IPL sintering techniques are considered to be complementary techniques and are highly suitable in different application fields.
منابع مشابه
Angioma serpiginosum successfully treated by a single session of intense pulsed light therapy
Angioma serpiginosum (AS) is a nevoid capillary malformation developed congenitally or thereafter. The AS stops growing after puberty and may remain persistent throughout life. The pulsed dye laser (PDL) and KTP are used to treat the AS usually after several sessions. We treated a patient with AS with only one session of intense pulsed light (IPL) therapy. A 40-year-old lady with Fitzpatrick sk...
متن کاملThe Effect of Laser Sintering Process Parameters on Cu Nanoparticle Ink in Room Conditions
Copper is an interesting material for printed electronics inks because, for example, of its good conductivity and lower raw material price compared to silver. However, post-processing Cu inks is challenging because of non-conductive copper oxide. In this work, inkjet-printed Cu nanoparticle structures were sintered on a polyimide substrate with a continuous-wave 808-nm diode laser. Laser sinter...
متن کاملکاربرد نور شدید طپشی در درمان خال Spilus : گزارش چند بیمار
Background: Intense Pulsed Light (IPL) technology is one of our new measures in treating dermatologic disorders including undesirable skin pigmentation. In contrast with lentigines and freckling of the skin, few reports about nevus spilus treatment using intense pulsed light have been published. The aim of current study was to evaluate efficacy and safety of nevus spilus treatment with an inten...
متن کاملLaser sintering of copper nanoparticles on top of silicon substrates.
This study examines the sintering of inkjet printed nanoparticle copper ink in a room environment using a laser as a high speed sintering method. Printed patterns were sintered with increasing laser scanning speed up to 400 mm s(-1). The resistivities of the sintered structures were measured and plotted against the scanning speeds. Increased resistivity seems to correlate with increased scannin...
متن کاملبررسی اثر منبع نوری پالسی پر قدرت (IPL) بر روند پیری ناشی از صدمه آفتاب (Photoaging
Background: Photo-damaged skin is characterized not only by wrinkles and creases but also by epidermal and dermal atrophy, rough skin texture, irregular pigmentation, talengiectasis , laxity and enlarged pores. There is growing interest in the development of noninvasive methods to treat photo-damaged skin. Intense Pulsed Light (IPL), a non-coherent, broadband, pulsed light source is effective i...
متن کامل