Intrinsic Residual Stresses in Metal Films Synthesized by Energetic Particle Deposition
نویسندگان
چکیده
Los Alamos National Lafmratory, an affirmative action/equal opportunity employer, is operated by the University of California for the U.S. Department of Energy under contract W-7405-ENG-36. By acceptance of this article, the publisher recognizes that the U.S. Government retains a nonexclusive, royalty-free license to publish or reproduce the published form of this contribution, or to allow others to do so, for U.S. Government purposes. Los Alamos National Laboratory requests that the publisher identify this article as work performed under the auspices of the U.S. Department of Energy, Los Alamos National Laboratory strongly supports academic freedom and a researcher’s right to publish; as an institution, however, the Laboratory does not endorse the viewpoint of a publication or guarantee its technical correctness.
منابع مشابه
Modeling of Residual Stresses in Thin Metal Films
Residual mechanical stresses introduced during deposition of thin films and coatings have a significant impact on the reliability of electronic devices and structural components. The mechanical stress in thin metal films consists of a thermal component and an intrinsic component due to the evolution of the metal microstructure during film growth. Controlling of the intrinsic stress component ha...
متن کاملسنتز، شناسایی وآنالیز حرارتی کمپلکس جدید مس نیترات با لیگاند دی متیل آمینو اتیل آزید
2- Azido N, N-Dimethyl Ethane-1-Amine, well-known as a DMAZ, is considered as a new green liquid fuel and a good alternative to hydrazine fuels because of its high performance while being non-carcinogenic. But no DMAZ energetic complex has been synthesized and reported yet. In this study, a new energetic complex of copper (II) nitrate and DMAZ ligand was synthesized for the purpose of increasin...
متن کاملThin Film Deposition Using Energetic Ions
One important recent trend in deposition technology is the continuous expansion of available processes towards higher ion assistance with the subsequent beneficial effects to film properties. Nowadays, a multitude of processes, including laser ablation and deposition, vacuum arc deposition, ion assisted deposition, high power impulse magnetron sputtering and plasma immersion ion implantation, a...
متن کاملResidual stress analysis in thick uranium films
Residual stress analysis was performed on thick, 1–25 lm, depleted uranium (DU) films deposited on an Al substrate by magnetron sputtering. Two distinct characterization techniques were used to measure substrate curvature before and after deposition. Stress evaluation was performed using the Benabdi/Roche equation, which is based on beam theory of a bi-layer material. The residual stress evolut...
متن کاملREACTIVE PULSE MAGNETRON SPUTTERING FOR THE DEPOSITION OF HIGH QUALITY AlN THIN FILMS
Aluminium nitride is a promising coating material for many applications, due to its good physical and mechanical properties. Hard transparent Aluminium nitride thin films have been deposited by bipolar reactive pulsed magnetron sputtering (PMS). With its inherent advantages of energetic particle bombardment of the growing film and minimal arcing tendency even in dielectric layer deposition proc...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2000