Comparison of flow modification induced by plasma and fluidic jet actuators dedicated to circulation control around wind turbine airfoils
نویسندگان
چکیده
In order to reduce the aerodynamic load fluctuations on wind turbine blades by innovative control solutions, strategies of active circulation control acting at the blade airfoil trailing edge are studied, allowing lift increase and decrease. This study presents a comparison of results obtained by performing surface plasma and continuous fluidic jet actuation on a blade airfoil designed with a rounded trailing edge. In the present study, both actuator types are located at the trailing edge. Plasma actuators act uniformly in the spanwise direction, whereas fluidic jets blow through small squared holes distributed along the span, and therefore, provide a three-dimensional action on the flow. Load and velocity field measurements were performed to assess the effectiveness of both actuators and to highlight the flow mechanisms induced by both actuation methods for lift-up configurations. Results are presented for a chord Reynolds number of 2. 10 and for a lift coefficient increase of 0.06.
منابع مشابه
Airfoil Leading and Trailing Edge Separation Control Using SDBD Plasma Actuators
Wind tunnel experiments were conducted to understand boundary layer separation control on airfoils. The objective of this research was to better implement flow control strategies with single dielectric barrier discharge (SDBD) plasma actuator designs for airfoils that exhibit both leading and trailing edge stall characteristics at realistic flight speeds and Reynolds numbers. The NASA energy ef...
متن کاملFluidic-based Virtual Aerosurface Shaping
Recent work on a novel approach to the control of the aerodynamic performance of lifting surfaces by fluidic modification of their apparent aerodynamic shape, or virtual aerosurface shaping is reviewed. This flow control approach emphasizes fluidic modification of the “apparent” aerodynamic shape of the surface with the objective of altering or prescribing the streamwise pressure gradient. Cont...
متن کاملDesign and Implementation of the Rotor Blades of Small Horizontal Axis Wind Turbine
Since the renewable resources of energy have become extremely important, especially wind energy, scientists have begun to modify the design of the wind turbine components, mainly rotor blades. Aerodynamic design considered a major research field related to power production of a small horizontal wind turbine, especially in low wind speed locations. This study displays an approach to the selectio...
متن کاملAerodynamic Characteristics of Asymmetric Airfoils Blade Small Vertical Axis Wind Turbines
In this paper, using sliding mesh model, the numerical simulation of small vertical axis wind turbine aerodynamic performance was studied with FLUENT software. Got change rule of four same thickness and different camber‘s NACA series asymmetrical airfoil moment coefficient of the wind turbine and wind power machine with the tip speed ratio. Wind turbine benchmark blade around the flow field was...
متن کاملModel Predictive Control of Trailing Edge Flaps on a Wind Turbine Blade
Trailing Edge Flaps on wind turbine blades have been studied in order to achieve fatigue load reduction on the turbine components. We show in this paper how Model Predictive Control can be used to do frequency weighted control of the trailing edge flaps in order to reduce fatigue damage on the blade root. The design model is based on a modal model of the blade structure and a steady state aerod...
متن کامل